Beyerdynamic 709190 Merkblatt
A
PPLICATIONS
Within few seconds the CUSTOM HEADSET GEAR connection cable
turns the CUSTOM ONE PRO headphone into a professional
headset for multimedia, gaming and Voice over IP applications.
The detachable 2.5 m long connection cable is single-sided and
equipped with a gooseneck microphone. To connect the micro-
phone and headphone the cable has gold plated mini jack plugs
which are appropriately labelled. For the headphone connector a
1/4" adapter is included.
Due to the cardioid polar pattern the gooseneck microphone
features a high gain before feedback.
turns the CUSTOM ONE PRO headphone into a professional
headset for multimedia, gaming and Voice over IP applications.
The detachable 2.5 m long connection cable is single-sided and
equipped with a gooseneck microphone. To connect the micro-
phone and headphone the cable has gold plated mini jack plugs
which are appropriately labelled. For the headphone connector a
1/4" adapter is included.
Due to the cardioid polar pattern the gooseneck microphone
features a high gain before feedback.
F
EATURES
• Detachable single-sided connection cable with
condenser gooseneck microphone
• Turns the CUSTOM ONE PRO headphone
into a professional headset
• Perfect for gaming, multimedia and Voice over IP (VoIP)
CUSTOM HEADSET GEAR
Connection Cable with Gooseneck Microphone
beyerdynamic GmbH & Co. KG
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. +49 (0) 71 31 / 617 - 0 | Fax +49 (0) 71 31 / 617 - 204
info@beyerdynamic.de | www.beyerdynamic.com
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. +49 (0) 71 31 / 617 - 0 | Fax +49 (0) 71 31 / 617 - 204
info@beyerdynamic.de | www.beyerdynamic.com
For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E2/CUSTOM ONE GEAR (06.13)
Non-contractual illustrations. Contents subject to change without notice. E2/CUSTOM ONE GEAR (06.13)
1 of 2
T
ECHNICAL
S
PECIFICATIONS
Cable length and type . . . . . . . . 2.5 m, straight cable
Connection . . . . . . . . . . . . . . . . Mini stereo jack plug (3.5 mm)
Connection . . . . . . . . . . . . . . . . Mini stereo jack plug (3.5 mm)
1/4" adapter (6.35 mm)
Microphone
Transducer type . . . . . . . . . . . . . Condenser (back electret)
Operating principle . . . . . . . . . . Pressure gradient
Frequency response . . . . . . . . . . 20 - 20.000 Hz
Polar pattern . . . . . . . . . . . . . . . Cardioid
Open circuit voltage
at 1 kHz (0 dB = 1 V/Pa) . . . . . . . 3.2 mV/Pa = -50 dBV ± 3 dB
Nominal impedance . . . . . . . . . . approx. 2.2 kΩ
Max. SPL at 1 kHz . . . . . . . . . . . 117 dB
Supply voltage . . . . . . . . . . . . . . 1.5 - 9 V
Connection . . . . . . . . . . . . . . . . Mini stereo jack plug (3.5 mm)
Transducer type . . . . . . . . . . . . . Condenser (back electret)
Operating principle . . . . . . . . . . Pressure gradient
Frequency response . . . . . . . . . . 20 - 20.000 Hz
Polar pattern . . . . . . . . . . . . . . . Cardioid
Open circuit voltage
at 1 kHz (0 dB = 1 V/Pa) . . . . . . . 3.2 mV/Pa = -50 dBV ± 3 dB
Nominal impedance . . . . . . . . . . approx. 2.2 kΩ
Max. SPL at 1 kHz . . . . . . . . . . . 117 dB
Supply voltage . . . . . . . . . . . . . . 1.5 - 9 V
Connection . . . . . . . . . . . . . . . . Mini stereo jack plug (3.5 mm)
Ring + tip: signal
Sleeve: ground
Sleeve: ground
Dimensions (L x W x H) . . . . . . . 130 x 10 x 10 mm
Weight. . . . . . . . . . . . . . . . . . . . approx. 6 g
Weight. . . . . . . . . . . . . . . . . . . . approx. 6 g
Headphone
plug
CUSTOM HEADSET GEAR connection cable
with gooseneck microphone
with gooseneck microphone
CUSTOM ONE PRO headphone with
CUSTOM HEADSET GEAR connection cable
CUSTOM HEADSET GEAR connection cable
Microphone
plug
plug
V
ERSIONS
Custom Headset Gear
Connection cable with cardioid gooseneck
microphone, plug-in type and lockable,
2.5 m long, black,
2 x mini stereo jack plugs (3.5 mm) and
1 x 1/4" adapter (6.35 mm) . . . . . . . . Order # 709.190
microphone, plug-in type and lockable,
2.5 m long, black,
2 x mini stereo jack plugs (3.5 mm) and
1 x 1/4" adapter (6.35 mm) . . . . . . . . Order # 709.190