B&B Electronics iMcV-10G-Converter XFP/XFP 860-12100 Merkblatt

• Interchangeable XFP modules allow for

multiple fiber mode/type conversion

options (single-mode, multi-mode) as well

as support for copper XFPs

• DDMI enabled XFPs are supported

through SNMP when installed in a

compatible managed chassis

• Supports 3R’s signal regeneration -

Re-amplify, Re-shape, Re-time

• Ideal for use with IMC Networks’ XFPs

• Supports a wide range of XFP Modules

with transmission speeds from 9.9 Gbps

to 11.3 Gbps

• Modules are hot-swappable; no need to

power-down chassis when upgrading or

trouble-shooting a single module

• User selectable FX LinkLoss enables the

operator to identify a cable fault/failure

when the unit is not used in a managed

chassis

• Supports Config Control, a feature

that retains the latest configuration of

a module regardless of how the initial

configuration was setup; whether by DIP

Switch or SNMP Management Module

• Supports XFP Loopback (Lineside & SFI)

and Loss Carry Forward (XFP dependent

The iMcV-10G-Converter is a dual-wide SNMP manageable

module that allows network operators to convert multiple fiber

types and wavelengths, as well as copper XFPs, within a network.

It installs in the modular, SNMP-manageable iMediaChassis

series  and  in  the  unmanaged  MediaChassis  series.

The iMcV-10G-Converter is protocol-independent with dual

XFP ports which can provide a single conversion between

copper,  different  wavelengths  or  single-mode  and  multi-

mode fiber, single-mode to single-mode fiber or multi-mode

to single-strand single-mode fiber. The iMcV-10G-Converter

module  supports  a  variety  of  user-configurable  features

such  as  LinkLoss,  LoopBack  and  variable  speed  XFPs.

The iMcV-10G-Converter uses 10 Gbps XFP modules which

are  capable  of  moving  large  amounts  of  data  over  long

distances.    The  hot-swappable  nature  of  XFPs  and  the

numerous fiber modes and types that are available allow for

easy configuration and future upgrading as network demands

evolve.

Easily configure and manage converters with the GUI-based

iView². As an SNMP management application, iView² gives

network  managers  the  ability  to  monitor  and  control  IMC

Networks’  products.  iView²  runs  standalone  on  Windows

NT/XP/2000/7  or  as  a  Web  Server  running  under  IIS.

For  assistance  in  selecting  the  right  version  of  iView²  for

your  operating  system,  visit  our  web  site  at:http://www.

imcnetworks.com/Products/iView2.cfm

RoHS

Compliant

In  this  application,  two  servers  are

connected over a 10 Gbps network

across  a  campus.    The  distance

limitation of the original multimode

fiber  used  in  the  initial  installation

is  extended  via  the  iMcV-10G-

Converters over single-mode fiber.

XFP transceivers sold separately