Panasonic ET-PKE12B Merkblatt
S
P
E
C
F
I
L
E
ET-
PKE12B
Bracket assembly
As of January 2012
SFL12A001
1 / 1
Weights and dimensions shown are approximate. Specifications subject to change without notice.
1
1
6
.5
(4
-1
9
/3
2
)
482 (18-31/32)
5
9
8
(
2
3
-1
7
/3
2
)
Specifications
Dimensions (W × H × D):
482 × 116.5 × 598 mm
(18-31/32 × 4-19/32 × 23-17/32 inches)
Weight:
Approx. 8.5 kg* (18.7 lbs*)
Applicable ceiling mount bracket:
ET-PKE16H/PKE16S
Applicable projector:
PT-EX12K
Parts
Projector mount bracket (bracket assembly) . . . . 1
Fixer plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Washer-fitted hexagonal bolts (M8 × 16) . . . . . . 12
Washer-fitted pan head hexagonal screws
(M5 × 12) . . . . . . . . . . . . . . . . . . . . . . . . . 4
Protection sheet . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Wire rope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
* Average value. May differ depending on models.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
Description
This bracket assembly is used when mounting a Panasonic’s applicable projector to ceilings.
NOTE:
This ceiling mount bracket cannot be used by itself. Combine it with the optional ET-PKE16H/PKE16S ceiling mount bracket.
C a u t i o n :
•
•
Mounting should be done by a qualified technician.
•
Make sure that the mounting (ceiling) area has sufficient strength.
•
Read the enclosed mounting instructions thoroughly before starting.
•
Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque
wrench and tighten screws to the torque specified in the instructions.
•
When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.