Panasonic ET-PKD75S Merkblatt

Seite von 1
1
ET-PKD75S
Ceiling Mount Bracket
S P E C     F I L E
Description
This ceiling mount bracket is to be used when mounting DLP™-based projectors to the low
ceiling. 
Specifications
Vertical correction angle:
+5°
Horizontal correction angle:
±2.5°
Dimensions (W x H x D): 
478 x 110 x 343 mm 
(18-13/16˝ x 4-5/16˝ x 13-1/2˝)
Weight:
5.2 kg (11.5 lbs)
Weights and dimensions shown are approximate. Specifications subject to change without notice.
Digital Light Processing and DLP are trademarks of Texas Instruments.
Attachment plate  . . . . . . . . . . . . . . . .1
Angle adjuster  . . . . . . . . . . . . . . . . . .1
Projector mount bracket  . . . . . . . . . . .1
Safety fitting . . . . . . . . . . . . . . . . . . . .1
Washer-fitted screws (M6 x 12)  . . . . .15
Washer-fitted screws (M4 x 8) . . . . . . .4
Caution:
Mounting should be done by a qualified technician.  Make sure that the mounting (ceiling) area has
sufficient strength.  Read the enclosed mounting instructions thoroughly before starting. 
As of August 2004
Dimensions
unit: mm (inch)
(Dimensions given in inches are approximate.) 
Note: This illustration is not drawn to scale.
236
29
(9-9/32˝)
129
(5-3/32˝)
215
(8-15/32˝)
(1-5/32˝)
202
(7-15/16˝)
254 (10˝)
218 (8-19/32˝)
249
(9-13/16˝)
140
(5-1/2˝)
215 (8-15/32˝)
260 (10-1/4˝)
(3-15/32˝)
Ø1
1 (7/16˝)
Parts
The assembled ET-PKD75S with a projector
and the ET-D75LE1 optional lens mounted
Attachment Plate