IQinVision Alliance-pro IQA32WI-A2 Benutzerhandbuch

Produktcode
IQA32WI-A2
Seite von 14
Architectural and Engineering Specification 
                
 
IQA32WI, IQA32WE, IQA32WX 
Page 5 of 14 
         Revision: (07302013) 
SS.  The IP dome camera shall support on camera storage of time lapse and event recording  using 
micro SD Class 6+ media or higher. 
 
TT.   The IP dome camera shall have an event handler allowing the camera to send an image or video 
clip to on-camera storage, FTP site, email address, and or network attached storage when 
receiving an internally or externally generated event. 
 
UU. The IP dome camera shall support the following licensed On-Camera IQapps. 
1.  IQaccess: Software that enables multiple users to receive alerts via a pop-up window          
 
    when the camera receives a hardware or software trigger. 
 
VV.  The IP dome camera shall be video analytics ready. 
 
 
WW. 
 The IP dome camera shall be FCC Part15 Class B, CE, and RoHS compliant. 
 
2.4  
NETWORKING REQUIREMENTS 
A.  The IP dome camera shall incorporate a built-in web server allowing full control and 
configuration of the camera. 
 
B. The IP dome camera shall be Power over Ethernet (IEEE802.3af Class1) compliant (IQA32NI & 
IQA32E), or (IEEE802.3af Class 2) compliant (IQA32NX). 
 
C. The IP dome camera shall have a 100 Mbps Ethernet RJ-45 connection that can deliver data at a 
maximum rate of 35 Mbps. 
 
D.  Ethernet: 
1.  10Base-T/100 Base-TX 
2.  Auto-sensing 
3.  Half/Full Duplex 
4.  RJ45 
 
E. The IP dome camera shall provide integrated support for TCP/IP, HTTP, HTTPS, DHCP, UDP, RTP, 
RTSP, DNS, ARP, ICMP, NTP, UPnP, ZeroConf, APIPA, UDP multicast, SNMP, FTP, SMTP, Telnet, 
and CIFS protocols.