D-Link Nway 32 Bit PCI Bus Master Adapter DFE-530TX Merkblatt
Produktcode
DFE-530TX
DFE-530TX
10/100Mbps PCI Card
Key Features
DFE-530TX Fast Ethernet adapter is equipped with an auto-negotiate
10/100Mbps NWay interface. It plugs into a desktop PC's PCI expansion
bus slot to run in 10BASE-T or 100BASE-TX mode, half or full duplex.
10/100Mbps NWay interface. It plugs into a desktop PC's PCI expansion
bus slot to run in 10BASE-T or 100BASE-TX mode, half or full duplex.
10/100Mbps PCI Card for PC
D-Link's DFE-530TX Fast Ethernet adapter is a high-performance auto-sensing 10/100Mbps dual-speed adapter for the PCI
bus. Installable in a Pentium or Pentium Pro PC equipped with PCI expansion slots, this adapter turns a desktop into a high-
bandwidth graphic/multimedia workstation or a power server running at full-duplex speed.
bus. Installable in a Pentium or Pentium Pro PC equipped with PCI expansion slots, this adapter turns a desktop into a high-
bandwidth graphic/multimedia workstation or a power server running at full-duplex speed.
Powerful Performance
Auto-sensing 10/100Mbps Interface
Full Duplex Support
Easy Migration
Network Security
Comprehensive Driver Support
The adapter operates in the 32-bit Bus Master mode, delivering
The adapter's single connector connects to either 10BASE-T
throughputs at multi-megabits per second with little stress on the
Ethernet or 100BASE-TX Fast Ethernet completely without any
host's CPU. Supporting PCI clock speeds independently of the
need to set configuration. It detects the connected hub's or switch's
network clock, it transfers data directly to/from the host's memory,
capability and auto-negotiates to use the highest available speed.
by-passing the CPU to alleviate the host's workload.
Full/half duplex operation is auto-detected in both 10BASE-T and
The adapter allows users to migrate from Ethernet to Fast Ethernet
100BASE-TX modes. When connected to a switch in full duplex,
in easy steps. 10BASE-T users can upgrade to 100BASE-TX
the network speed can be increased to 200Mbps, making the
anytime without changing driver software or network cables.
adapter an ideal NIC for high-speed server deployment.
Network administrators can install optional boot ROMs on the
The adapter supports all major network operating systems,
adapters to implement network security. Diskless workstations
including NetWare, Windows and Linux.
equipped with these ROMs can remote boot from NetWare or
Windows NT servers and access authorized data.
Windows NT servers and access authorized data.
10/100Mbps NWay interface
Full duplex supported for both 10BASE-T, 100BASE-TX
32-bit PCI bus master operation
Remote boot supported
Low Ethernet command processing overhead
Easy-to-view diagnostic LEDs
Single shielded RJ-45 connector
Simply Plug and Play
UTP and STP supported
Complete driver support
Support IEEE 802.1x Port-based Network
Access Control (MD5 only)
Access Control (MD5 only)