Welland EP-211 EP-211-N014-1-H128G Merkblatt

Seite von 2
2 port Power over eSATA (eSATAp) PCI-E card with RAID 
function, Supports 5V/12V
The Welland EZSTOR EP-221, 2 port Power over eSATA (eSATAp) PCI-E card expands your PC with two external Power 
Over eSATA ports. These ports enable you to connect not only Power Over eSATA devices but also the standard devices 
with built-in eSATA and USB A Type connectors. Power over eSATA port is the hybrid of eSATA and USB2.0 and it is 
compliance with 5V / 12V standard, as long as it co-works with 5V / 12V Power over eSATA cable, then it doesn't require 
separate power when connecting to 2.5", 3.5" or 5.25" drive under eSATA transmission. Additionally, with 1 internal IDE 
port and the RAID function enhance the application of EP-221. 
Model Number 
External Port 
2 x external Power over eSATA (eSATAp) port 
(Compatible with Power over eSATA / USB A Type / eSATA connector) 
Internal Port 
1 x IDE (PATA) connector 
PC Interface 
PCI Express 1.1 specification, Standard 121mm Bracket 
Bus Power Support 
5V / 12V 
Data transfer rate 
USB2.0 up to 480 Mbps ; eSATA up to 3Gbps 
System Request 
Windows 2K / Server 2003 / XP / Vista / 7 , MAC 10.4.6 or later & Linux system 
PC with a free PCI Express slot 
Motherboard with a free USB pin header 
Available 12V power cable (with big 4 pin power plug) 
RAID Support 
RAID 0 / 1、JBOD and SATA Port-Multiplier