Dialogic DIVA Pro PCI ISDN Card(Europe). 305-189-03 Benutzerhandbuch
Produktcode
305-189-03
International Regulatory Information
17
The larger distance shown in brackets applies where the local environment within the host
is subject to conductive pollution or dry non-conductive pollution which could become
conductive due to condensation. Failure to maintain these minimum distances would
invalidate the approval.
is subject to conductive pollution or dry non-conductive pollution which could become
conductive due to condensation. Failure to maintain these minimum distances would
invalidate the approval.
These distances can be checked by measuring between the adjacent parts. X is the
clearance distance which is the shortest distance in air between two points. Y is the
creepage path (along surfaces) between the same two points.
clearance distance which is the shortest distance in air between two points. Y is the
creepage path (along surfaces) between the same two points.
Regulatory information for Australia
PCI models
•
This customer equipment shall only be installed in a PC that requires the use of a tool
to gain access to internal parts (e.g. this customer equipment must not be installed in
a PC with a ‘flip lid’).
to gain access to internal parts (e.g. this customer equipment must not be installed in
a PC with a ‘flip lid’).
•
Proper installation of the Diva adapter card requires that it is screwed to the metal
backplate of the computer. This ensures proper grounding, which is necessary for
safety purposes.
backplate of the computer. This ensures proper grounding, which is necessary for
safety purposes.
•
This customer equipment may only be installed in host equipment where there is at
least 2 mm of air gap between the customer equipment and adjacent boards (PCBs).
least 2 mm of air gap between the customer equipment and adjacent boards (PCBs).
•
Only compliant line cord set(s) shall be used as replacements with this customer
equipment.
equipment.
PC Card (PCMCIA) models
•
This customer equipment may only be installed in conjunction with compliant customer
equipment.
equipment.
•
This customer equipment must only be used with the Diva PCM S/T Inferface Cable,
Part No. 300-172-02.
Part No. 300-172-02.
•
Only line cord set(s) which are compliant shall be used as replacements with this
customer equipment.
customer equipment.
Diva adapter
4.0
5.0 (8.0)
up to 250
4.0
6.4 (10.0)
up to 300
Clearance
X mm
Creepage
Y mm
Voltage used or generated by other parts of the host
or expansion card Vrms or Vdc
Warning: This customer equipment is to be installed and maintained by
service personnel as defined by AS/NZS 3260 Clause 1.2.14.3 Service
Personnel. It may be hazardous if your computer is not properly plugged in and
grounded.
service personnel as defined by AS/NZS 3260 Clause 1.2.14.3 Service
Personnel. It may be hazardous if your computer is not properly plugged in and
grounded.