Bosch DS1102i DS1102I Benutzerhandbuch

Produktcode
DS1102I
Seite von 3
 
Intrusion Alarm Systems | DS1102i Series Glassbreak Detectors
DS1102i Series Glassbreak Detectors
 
www.boschsecurity.com
 
 
 
 
 
 
 
 
u
Microprocessor-based sound analysis technology
(SAT)
u
Automatic environmental test circuitry
u
Sound check
The DS1102i Detector Series uses microprocessor-
based sound analysis technology (SAT) to listen for
the specific frequencies associated with breaking
glass. The DS1102i and DS1102i‑CHI can be used to
detect breakage of plate, tempered, laminated and
wired glass types. A built-in environmental test feature
alerts the installer to false alarm hazards in harsh
environments. The square detectors mount on ceilings
or walls.
Functions
Signal Processing
Audio signals are analyzed using microprocessor-based
SAT and must produce specific frequency, signature,
and timing relationships to cause an alarm. The
sophistication of this processing technique ensures
proper catch performance while eliminating false
alarms.
Test Features
The magnet‑operated test mode provides a location
verification and operational test when using the
optional DS1110i Glassbreak Tester. The test mode
also includes an environmental test that alerts the
installer to possible false alarm sources caused by
ambient noise. The automatic sound check feature
allows the end user to verify that the detector is
powered and functioning by clapping his hands. An
externally‑visible alarm LED indicates an alarm or test
condition and can be programmed to latch if desired.
Certifications and approvals
Region
Certification
Europe
CE
2004/108/EC EMC Directive (EMC);
2006/95/EC Low-Voltage Directive
(LVD); 2011/65/EU Restriction of the
use of certain hazardous substances in
electrical and electronic equipment
USA
UL
ANSR: Intrusion Detection Units
(UL639), ANSR7: Intrusion Detection
Units Certified for Canada (ULC-S306)
Canada
ULC
ANSR7.BP1448 Intrusion-detection
Units Certified for Canada
China
CCC
DS1102i-CHI: 2009031901000553