Cisco FactoryUpgrade 8MB DRAM to 12MB 800Series (B) MEM800-8U12D Benutzerhandbuch
Produktcode
MEM800-8U12D
11
Release Notes for Cisco IOS Release 12.0(7)XV Feature Packs for the Cisco 800 Series
78-10446-01
Installation Notes
Installation Notes
This section describes the following topics:
•
•
•
Image Installation Tips and Troubleshooting When Using The RSL
Image Installation Tips
The following information about RSL operations can help you with the installation process:
•
If you are loading software on a preconfigured Cisco 800 series router, save the router configuration
file on your PC before running the RSL.
file on your PC before running the RSL.
•
If you have added any static entries to the PC Address Resolution Protocol (ARP) table, one or
more of them may be deleted by the RSL. Manually re-enter any deleted entries in the PC ARP
table.
more of them may be deleted by the RSL. Manually re-enter any deleted entries in the PC ARP
table.
•
During a connection, if the Cisco 800 series router running configuration is not the same as its
startup configuration, the exact configuration is not restored. Any changes that you made since the
last time you entered copy running-config startup-config or write memory commands are lost.
startup configuration, the exact configuration is not restored. Any changes that you made since the
last time you entered copy running-config startup-config or write memory commands are lost.
•
The RSL restores the Cisco 800 series router startup configuration, but some running configuration
commands are not restored. To restore the exact running configuration, reboot the router. The
following interface configuration commands are not restored to the running configuration:
commands are not restored. To restore the exact running configuration, reboot the router. The
following interface configuration commands are not restored to the running configuration:
–
no shutdown
–
no ringspeed
–
media-type aui
Recovering from a Connection Error
If any of the following elements apply to your installation, modify the Short Timeout value from the
Options dialog box in the RSL:
Options dialog box in the RSL:
•
You are connecting to a router or access server that has a large configuration file.
•
You are connecting to a Cisco AS5200 access server.
•
You see the following error message:
"Failed to configure the router to enable the Cisco IOS software image and configuration
file upload and download operations. You may want to check the router to make sure that
the selected interface exists."
If you are connecting to a Cisco AS5200, increase the Short Timeout value to 60 seconds. The
Cisco AS5200 requires up to 45 seconds to write a configuration to nonvolatile random-access memory
(NVRAM) due to the number of interfaces the it must check during this process.
Cisco AS5200 requires up to 45 seconds to write a configuration to nonvolatile random-access memory
(NVRAM) due to the number of interfaces the it must check during this process.
If you are connecting to any other router or access server, increase the Short Timeout to a value over
25 seconds.
25 seconds.