OKI MicroLine 590 Elite 00036103 Benutzerhandbuch
Produktcode
00036103
Loading Single-Sheet Paper
Loading Single-Sheet Paper
Move the paper lever to the position marked TOP (1). Unsnap the paper separator from the
housing, then swing it upright to the position illustrated (2): make sure the wire feed guide is
against the separator. Adjust the paper feed guides to fit the width of the paper and place a sheet
of paper in the paper separator (3).
housing, then swing it upright to the position illustrated (2): make sure the wire feed guide is
against the separator. Adjust the paper feed guides to fit the width of the paper and place a sheet
of paper in the paper separator (3).
The paper automatically feeds into the printer. The printhead travels back and forth, gently firing
its pins to sense the paper thickness and set the printhead gap.
its pins to sense the paper thickness and set the printhead gap.
Important!
If you are printing envelopes, you need to enter the printer Menu, go to the Top Feed group and
change the setting for Gap Control to 6 to ensure optimum printing performance (see page 41).
If you are printing envelopes, you need to enter the printer Menu, go to the Top Feed group and
change the setting for Gap Control to 6 to ensure optimum printing performance (see page 41).
ML590/591 ( 96-02-07 )