Denon AVR-1513 Merkblatt

Seite von 2
D&M Holdings Inc.
D&M Building, 2-1 Nisshin-cho, Kawasaki-ku, Kawasaki-shi, 
Kanagawa, 210-8569, Japan
www.denon.com
Denon Electronics (USA), LLC.
100 Corporate Drive, Mahwah, New Jersey 07430 USA
TEL: 201-762-6500 
usa.denon.com
20010212 A
State-of-the-art Denon Solutions for
Maximizing Content Quality
• Fully discrete, identical quality and power for all 
5 channels (110 W x 5 ch)
To faithfully reproduce the original surround sound, each of 
the AVR-1513’s 5 channels is equipped with the same power 
amp of equal power. Since these power amps also use 
discrete circuits configured with parts strictly selected for their 
contribution to high sound quality, rather than with low-cost 
integrated circuits (ICs), the surround sound playback is of 
impeccably high quality.
• Featuring 3D pass-through technology
By connecting a 3D-compliant Blu-ray disc player and 
3D-compliant TV to the AVR-1513, you will have a 3D home 
theater where you can enjoy high-definition sound and video 
on a level you’ve never experienced before. 
• High-definition audio support
The AVR-1513 has a decoder that supports Dolby TrueHD, 
the audio format of Blu-ray disc players, and DTS-HD, another 
high-grade digital audio format.
• Minimum Signal Path 
  for clear audio and video signal
The “simple and straight” design concept has been thoroughly 
implemented in the signal paths to contribute to immaculately 
clean audio and video playback. Signal paths are as short as 
possible to keep signal degradation in the audio and video 
circuitry to an absolute minimum.
• Direct Mechanical Ground Construction, 
  embodying concepts for thorough vibration 
  resistance
Vibration-resistant construction has been reviewed to thor-
oughly suppress the adverse influences of vibration on sound 
quality. The power transformers, a source of vibration, have 
been securely mounted on the highly rigid bottom chassis. 
Direct mounting of feet to the radiator in near proximity to 
each other serves to suppress mutual vibration with the power 
transformers and other sources of vibration.
• Denon’s proprietary Compressed Audio 
Restorer, to restore sound quality from compressed 
music sources
Connectivity & Future-ready Expandability
• Supports HDMI (3D, Deep Color, x.v.Color)
The HDMI ports on the AVR-1513 support transmission of a 
variety of video formats including 3D video as well as Deep 
Color and x.v.Color that express the beautiful images of full 
high definition. These ports let you enjoy sound and video 
programs recorded not only on Blu-ray discs but various other 
types of media, too.
• Stereo Mini Jack on front panel lets you connect 
any portable audio player
Compressed Audio Restorer is Denon technology that 
restores compressed music sources to their original 
p r e - compressed quality to give you a lively sonic 
ambience with greater detail and depth.
Ease-of-use
• GUI overlay on HD Source
You can easily make settings for your home theater system 
while viewing menus on the TV screen. These menu displays 
can also be output to the monitor over HDMI.
• Four quick select buttons, for easy operation
With the Quick Select buttons, you can preset volume levels 
for the sources you most frequently use. Then when you use 
one of the buttons to select a source, it is ready to play using 
the same settings each time.
•  Sleep Timer, set up to 120 minutes 
  in 10-minute increments
When you set the Sleep Timer and listen to music before you 
fall asleep, the AVR-1513 will automatically go into standby 
mode in the time that you set.
Main Specifications
Power amplifier section 
Rated output 
*THD figures are power amp stage values.
Front L/R
75 W + 75 W 
(8 ohms, 20 Hz - 20 kHz, THD 0.08 %) 
110 W + 110 W 
(6 ohms, 1 kHz, THD 0.7%) 
Center
75 W 
(8 ohms, 20 Hz - 20 kHz, THD 0.08 %) 
110 W
(6 ohms, 1 kHz, THD 0.7%) 
Surround L/R
75 W + 75 W 
(8 ohms, 20 Hz - 20 kHz, THD 0.08 %) 
110 W + 110 W 
(6 ohms, 1 kHz, THD 0.7%) 
Preamplifier section 
Input sensitivity/impedance  200 mV / 47 kohms
Frequency response
10 Hz ~ 100 kHz — +1, –3 dB (DIRECT mode)
S/N Ratio
98 dB (IHF-A weighted, DIRECT mode) 
FM section 
Tuning frequency range  87.5 - 107.9 MHz 
AM section 
Tuning frequency range  520 - 1710 kHz 
General
Power supply 
AC 120 V , 60 Hz 
Power consumption
330 W (Standby 0.5 W)
Dimensions (W x H x D)  17 
3/32" x 5 15/16" x 12 9/16"
434 x 151 x 319 mm
Weight 
17 lbs 3.1 oz, 7.8 kg
*Design and specifications are subject to change without notice.
*“Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby 
 Laboratories.
*DTS is a registered trademark and the DTS logos, Symbol and DTS-HD 
 are trademarks of DTS, Inc.
*HDMI, the HDMI logo and High-Definition Multimedia Interface are 
 trademarks or registered trademarks of HDMI Licensing LLC.
Ports
In
HDMI (front 1)
x 4
Composite (Video)
x 2
Analog Audio 
x 2
Stereo Mini input for Portable     
x 1
Digital Optical
x 1
Digital Coaxial
x 1
Out
HDMI Monitor
x 1
Composite Monitor
x 1
Audio Preout (SW)
x 1
Phones
x 1
Others
FM Tuner Antenna
x 1
AM Tuner Antenna
x 1
Convenient HDMI port on the front