Defender 21031 Benutzerhandbuch

1.  Connect the BNC to RCA connector to the top VIDEO OUT 

connection on the back of the DVR.

2.  Plug the RCA cable into the BNC connector.
3.  Attach the other end of the RCA cable to a yellow RCA 

video input on your TV/monitor.

4.  Switch the TV/Monitor source to view the DVR. (Consult 

the TV/Monitor manual for instructions on how to 

switch the video source).

5.   The bottom video out is for a second monitor. Plugging 

an RCA cable into this video out would be the same as 

plugging it into the top video output. 

1.  Plug the power cord into a power outlet (surge 

protected power outlet recommended).

2.  Insert the small end of the power supply wire into 

the rear DC 12V port on the DVR.

•  After a few seconds the splash screen will appear and

the DVR will start up.

1.   Plug the USB connection on the mouse into the top 

USB connection on the back of the DVR.