Defender 21031 Benutzerhandbuch

PICTURE IN PICTURE (PIP) mode allows you to view camera one in full screen and up to two camera channels (of your 

choice) as smaller screens in either corner of the screen.  You must have at least one camera connected to your DVR for 

PIP mode to function properly.  
To turn on PiP mode: 
1.  Right click and then select PIP Mode 1x1 or PIP 

Mode 1x2.

2.  1x1 allows you to view camera one in full screen 

and another camera in the lower left corner of the 

screen. 1x2 allows you to view camera one in full 

screen and two other cameras in the bottom left 

and right corners of the screen. 

3.  To exit PIP mode, right click the mouse. 

If you have connected audio-enabled cameras to the DVR you can adjust the level of sound or mute all noise being 

recorded. Select the VOLUME icon in the FUNCTION TOOLBAR. You can adjust the volume level using the bar or mute by 

checking the MUTE box. Select the SAVE DISK icon to save your settings.

1.     The MAIN MENU can be accessed by pressing the MENU button on the remote control or by right clicking the mouse, 

then selecting the MENU icon. 

2.     To make a selection from the MAIN MENU, left-click the mouse or press SELECT on the remote.
3.     When access any sub-menus, there are a few options available at the bottom of the screen: 

1. Default:     Restores all of the settings on the  

 

 

        current page to the default settings.

2. Apply:   Applies and saves changes made to the current 

menu page. 

3. Exit: 

Exits the current menu.