Terratec Cinergy 1400 DVB-T XE 10167 Benutzerhandbuch
Produktcode
10167
Hardware at a glance
The TV card
The following is an overview of the PCI card and its terminals.
1. The antenna input. Connect your DVB-T antenna here.
2. The antenna output. Use this connector to provide DVB-T signals to other devices such as
set-top boxes. Please note that the signal will not be amplified if your computer is not
running. The board must be powered up to enable the amplifier. This may result in signal
quality fluctuations, especially when bridging long distances.
running. The board must be powered up to enable the amplifier. This may result in signal
quality fluctuations, especially when bridging long distances.
3. Combined video input. Use the included plug adapter on this input to connect and record
FBAS and SVHS sources. Specialist retailers stock inexpensive SCART adapters with which
you can connect your VCR to your PC, letting you copy old VHS recordings and archive
them on DVD. For more information, see Chapter !!! .
you can connect your VCR to your PC, letting you copy old VHS recordings and archive
them on DVD. For more information, see Chapter !!! .
4. Input for optional remote control sensor (not included)
Cinergy 1400 DVB-T XE (English)
7