Sony 32" LCD TV HD Ready KDL-32S2520E Benutzerhandbuch

 GB

KDL-20S2020

2-685-333-14(1)

No sound, but good picture

• Press 2 +/– or % (Mute).
• Check that “TV Speakers” is set to “On” in the “Sound Adjustment” menu 

(page 22).

Noisy sound

• See the “Picture noise” causes/remedies on page 33.

The desired channel cannot be 
selected

• Switch between digital and analogue mode and select the desired digital/

analogue channel.

Some channels are blank

• Scrambled/Subscription only channel. Subscribe to the Pay Per View 

service.

• Channel is used only for data (no picture or sound).
• Contact the broadcaster for transmission details.

Digital channel is not displayed

• Check that the aerial is plugged directly into the TV (not through other 

equipment).

• Contact a local installer to find out if digital transmissions are provided in 

your area.

• Upgrade to a higher gain aerial.

The TV turns off automatically 
(the TV enters standby mode)

• Check if the “Sleep Timer” is activated, or confirm the setting of “Off 

Time” (page 24).

• If no signal is received and no operation is performed in the TV mode for 

10 minutes, the TV automatically switches to standby mode.

The TV turns on automatically

• Check if the “On Time” is activated (page 24).

Some input sources cannot be 
selected

• Select “AV Preset” in the “Set-up” menu and cancel “Skip” of the input 

source (page 25).

The remote does not function

• Replace the batteries.

010COV.book  Page 34  Wednesday, January 17, 2007  10:09 AM