Panasonic TH-47LFX60W Benutzerhandbuch

Seite von 5
4/5
47-inch Tough LCD Display
TH-47LFX60W
© Panasonic Corporation 2014
PMY12/22/2014
 Precautions for installation
Although the LFX60 display corresponds to the IP55 dust 
and water protection standard for outdoor use, please read 
the following precautions before designing the installation 
  
(1)  Always use the product at an ambient 
temperature in the range of 0°C – 50°C (-20°C – 
50°C with Outdoor mode “ON”).
Please make sure that the intake-air temperature does 
        
          !" # 
measures so that hot exhaust air from the Outlet does not 
     
* $     
Outlet
Inlet
* Portrait installation
Outlet
Inlet
For the portrait installation, the Display shall be rotated 90 
%  &
Portrait installation
-Power Indicator 
shall be at the 
lower left 
Landscape installation
-Power Indicator shall be 
at the lower right
(2)  The display utilizes a cooling system that 
circulates outside air. Do not install the display 
in a sealed case or enclosure without adequate 
ventilation.
When installing the display in a case or enclosure, please 
   % &          ' 
 !     +     %   '
more than 1,050 cm
2
 for the Inlet and Outlet respectively 
:; 
2
   %    "
[Example for the enclosure design]
1)  Openings for ventilation shall be located at the 
back of the Display Inlet and Outlet respectively 
with 1,050 cm
2
 openings (40% punched metal 
requires W:25cm × H:105cm dimensions).
Inlet
105cm
25cm
40% punched metal
Outlet
2)  The required space in the enclosure shall be ;
:" =   !>  : ?:"
@" On the left, right, top and bottom of the display: 5cm
40% opening of punched metal 
 
5cm
25cm
 
Front side
Rear side
5cm – 15cm
?:" C   % '   !  :;
exhaust air may not vent smoothly and be drawn into the 
!    E      ;   
material to isolate the intake and exhaust air shall be 
      
ᵦᶍ
ᶍᶒᶒ
ᵡᶍ
ᶍᶍ
ᶍᶊᶊ
Separator
More than 15cm