Crucial Micron M500DC 480GB 1.8" MTFDDAA480MBB2AE1ZAB Benutzerhandbuch

M500DC 1.8-Inch SATA NAND Flash SSD

MTFDDAA120MBB-2AE1ZABYY, MTFDDAA240MBB-2AE1ZABYY,
MTFDDAA480MBB-2AE1ZABYY, MTFDDAA800MBB-2AE1ZABYY

Features

• Micron

®

 20nm MLC NAND Flash

• RoHS-compliant package
• SATA 6 Gb/s interface
• ATA modes supported

– PIO mode 3, 4
– Multiword DMA mode 0, 1, 2
– Ultra DMA mode 0, 1, 2, 3, 4, 5

• Enterprise sector size support

– 512-byte

• Hot-plug capable
• Native command queuing support with 32-com-

mand slot support

• ATA-8 ACS2 command set compliant
• ATA security feature command set and password

login support

• Security erase command set: fast and secure erase
• Self-monitoring, analysis, and reporting technology

(SMART) command set

• 120GB performance (steady state) 

– Sequential 128KB read: 425 MB/s
– Sequential 128KB write: 200 MB/s
– Random 4KB read: 63,000 IOPS
– Random 4KB write: 23,000 IOPS
– READ latency: 0.50ms
– WRITE latency: 1.5ms

• 240GB performance (steady state) 

– Sequential 128KB read: 425 MB/s
– Sequential 128KB write: 330 MB/s
– Random 4KB read: 63,000 IOPS
– Random 4KB write: 33,000 IOPS
– READ latency: 0.50ms
– WRITE latency: 1.5ms

• 480GB performance (steady state) 

– Sequential 128KB read: 425 MB/s
– Sequential 128KB write: 375 MB/s
– Random 4KB write: 63,000 IOPS
– Random 4KB write: 35,000 IOPS
– READ latency: 0.50ms
– WRITE latency: 1.5ms

• 800GB performance (steady state) 

– Sequential 128KB read: 425 MB/s
– Sequential 128KB write: 375 MB/s
– Random 4KB read: 65,000 IOPS
– Random 4KB write: 24,000 IOPS
– READ latency: 0.50ms
– WRITE latency: 1.5ms

• Reliability

– Mean time to failure (MTTF): 2 million device

– Static and dynamic wear leveling
– Uncorrectable bit error rate (UBER): <1 sector

per 10

15

 bits read

• Endurance: Total bytes written (TBW)

– 120GB: 0.5PB; 240GB: 1.0PB; 480GB: 1.9PB;

800GB: 1.9PB

• Capacity

 (unformatted): 120GB, 240GB, 480GB,

800GB

• Mechanical: 5.0mm height

– Micro SATA connector: 3.3V ±5%
– 1.8-inch drive: 78.5mm x 54mm x 5mm

• Field-upgradeable firmware
• Power consumption: <6.0W (TYP); <6.3W (TYP) for

800GB

• Operating temperature

– Commercial (0°C to 70°C)

Notes: 1. Typical I/O performance numbers as meas-

ured using Iometer with a queue depth of
32 and write cache disabled.

2. 4KB transfers used for READ/WRITE latency

values.

3. The product achieves a MTTF based on pop-

ulation statistics not relevant to individual
units.

4. 1GB = 1 billion bytes; formatted capacity is

less.

5. Drive case temperature.

Warranty: Contact your Micron sales representative
for further information regarding the product,
including product warranties.

M500DC 1.8-Inch NAND Flash SSD

Features

PDF: 09005aef854f62f9
M500DC_1_8_disti.pdf - Rev. D 4/14 EN

1

Micron Technology, Inc. reserves the right to change products or specifications without notice.

©

 2013 Micron Technology, Inc. All rights reserved.

Products and specifications discussed herein are subject to change by Micron without notice.