Fte maximal MUX 310 2003518 Merkblatt
Produktcode
2003518
User’s manual · MUX 310
- 1 -
MUX 310 Version_en_1.0 FTE maximal
Chapter 1.
Installation.
1.1.
Safety rules
Please read the safety rules carefully before installing this equipment.
1.- Respect ventilation slots of this equipment. Avoid covering them with any object.
2.- Keep clean and without obstacles a minimum radius of 40 cm around this equipment.
3.- Do not place any heating source near this equipment.
4.- Do not install this equipment outside its temperature range.
5.- Avoid placements where liquids could be poured in or with important temperature changes.
6.- Never open the device by yourself. Refer servicing to qualified staff only.
7.- Never open the device when it is connected to electrical current.
8.- During connection it is suitable that the equipment is switched off and not connected to electrical current.
9.- Respect electrical security rules during the assembly. Use materials that fulfill laws in force.
10.- Connecting pin (power plug) must be quickly and simply accessible in order to assure a fast disconnection.
11.- To prevent shock hazard, do not touch the power plug with wet hands. Always unplug the receiver before working on
the connections.
12.- Do not put any heavy objects over this equipment; the equipment could be damaged.
1.- Respect ventilation slots of this equipment. Avoid covering them with any object.
2.- Keep clean and without obstacles a minimum radius of 40 cm around this equipment.
3.- Do not place any heating source near this equipment.
4.- Do not install this equipment outside its temperature range.
5.- Avoid placements where liquids could be poured in or with important temperature changes.
6.- Never open the device by yourself. Refer servicing to qualified staff only.
7.- Never open the device when it is connected to electrical current.
8.- During connection it is suitable that the equipment is switched off and not connected to electrical current.
9.- Respect electrical security rules during the assembly. Use materials that fulfill laws in force.
10.- Connecting pin (power plug) must be quickly and simply accessible in order to assure a fast disconnection.
11.- To prevent shock hazard, do not touch the power plug with wet hands. Always unplug the receiver before working on
the connections.
12.- Do not put any heavy objects over this equipment; the equipment could be damaged.
1.2.
Complete Content
MUX 310
User’s manual
Power cable
Adapters for frame FRA
300
1.3.
Description and connections
With this combiner, it is possible to mix signals coming from different head end systems, in order to obtain all the
generated TV channels in a single cable.
The combiner MUX 310 receives up to four RF signals in the TV band; it mixes them, and amplifies them to have them
ready at the output.
Each input has an attenuator that works in the whole band and allows regulation the gain applied to the signals coming
through it. With this regulation, you can obtain at the output all the signals with the same level.
The equipment has been designed in order to each input comes from an equipment of 6 channels of the DVB 310 S or
DVB 310 T, therefore with a MUX 310 it is possible to mix in an optimal manner up to 24 TV channels.
The concept of mixer is different than the concept of amplifier. The MUX 310 is not though to amplify the signals in order
to distribute them, but combining them keeping a quality parameters enough for amplifying all together once they are
mixed.
generated TV channels in a single cable.
The combiner MUX 310 receives up to four RF signals in the TV band; it mixes them, and amplifies them to have them
ready at the output.
Each input has an attenuator that works in the whole band and allows regulation the gain applied to the signals coming
through it. With this regulation, you can obtain at the output all the signals with the same level.
The equipment has been designed in order to each input comes from an equipment of 6 channels of the DVB 310 S or
DVB 310 T, therefore with a MUX 310 it is possible to mix in an optimal manner up to 24 TV channels.
The concept of mixer is different than the concept of amplifier. The MUX 310 is not though to amplify the signals in order
to distribute them, but combining them keeping a quality parameters enough for amplifying all together once they are
mixed.
User’s manual · MUX 310
- 2 -
MUX 310 Version_en_1.0 FTE maximal
Due to the equipment of 6 receivers with a Power Supply occupy the entire available
space in a FRA 300 frame, the MUX 310 is supplied with all the needed pieces for
extending the frame and allowing placing one space more.
In this manner, we achieve that a frame for 6 modules and Power Supply (total 7 modules)
becomes a frame for 8 modules.
It is important to highlight that the combiner MUX 310 is fed from the same SPS 310
which feeds the rest of the modules. Due to that, the MUX 310 has been designed with
Low Consumption and using as feeding the voltage of the via 23 VDC, used exclusively for
the feeding of the LNC in the rest of the modules, disposing normally of power enough in
the Power Supply.
1.4.
Accessories and installation examples
Accessories
UHF Outdoor Antenna
Mod. EVO 45 Code 9003910
Offset Dish 80cm
Mod. PR 80 AB Code. 0798021
Digital satellite receiver
Mod. DVB 310 S Code. 2003310
RF Inputs
Attenuators
Power Input
RF Out
Power LED