Intel 800GB DC P3700 SSDPE2MD800G410 Merkblatt
Produktcode
SSDPE2MD800G410
Intel® Solid-State Drive Data Center Family for PCIe*
Technical Specifications
1
Product Family
Intel® Solid-State Drive Data Center Family for PCIe*
Series Name
Intel® SSD DC P3500 Series
Intel® SSD DC P3600 Series
Intel® SSD DC P3700 Series
Capacities (GB)
400, 1200, 2000
400, 800, 1200, 1600, 2000
400, 800, 1600, 2000
Sequential Read
Sustained Write
Performance
Sustained Write
Performance
2,3
(MB/s)
Up to 2500
Up to 1700
Up to 2600
Up to 1700
Up to 1700
Up to 2800
Up to 2000
Up to 2000
Random I/O Read
Operations Write
Operations Write
70/30 Read/Write
per Second 4KB
K-IOPS
2, 3
Up to 450
Up to 35
Up to 85
Up to 85
Up to 450
Up to 56
Up to 160
Up to 460
Up to 175
Up to 265
Up to 175
Up to 265
Lifetime Endurance
7
Up to: 0.3 Drive Writes Per Day
3 Drive Writes Per Day
10 Drive Writes Per Day
Latency
4
Read/Write
20µs / 20µs
Interface
Non-Volatile Memory express (NVMe*) PCIe* 3.0 x4
Form Factor
Height / Weight
Height / Weight
2.5 inch
15mm/up to 125 grams
AIC
Half Height Half Length (HHHL) /195 grams
Life Expectancy
2 million hours Mean Time Between Failures (MTBF), 230 years
Power Consumption
5
Active: <25W (Write) / <11W (Read)
Idle: 4W Typical
NAND Flash Memory
Intel® NAND Flash Memory Multi-Level Cell (MLC) 20nm
Operating Temperature
6
2.5” FF: 0° C to 35° C ambient temperature with suggested airflow, 0° to 70° C case temperature
AIC: 0° C to 55° C ambient temperature with suggested airflow
RoHS Compliance
Meets the requirements of European Union (EU) RoHS Compliance Directives
Software Support
Intel® Solid-State Drive Data Center Tool, NVMe* Drivers:
Product ordering
Solid-State Drive Computing Starts with Intel Inside®. To order visit
1.
Based on the Intel Solid-State Drive DC P3500, P3600 and P3700 Series Product Specifications. Random I/O Operations based on Thousand (K) IOPS
2.
Performance varies by capacity and is measured using IOMeter* with Queue Depth 128, for sequential workload Queue Depth 128 with single worker. For Random workload Queue
Depth 32, with 4 workers.
Depth 32, with 4 workers.
3.
Measurements are performed on full span of logical block address (LBA) range on an SSD that is filled to capacity with data. IOPS setup: Intel® CoreTM i7-3770K CPU @ 3.50GHz, 8GB
of system memory, Windows* Server 2012, and IOMeter* tool were used. DC P3700 system performance is configuration dependent. Random performance is collected with 4 workers
each with 32 QD.
of system memory, Windows* Server 2012, and IOMeter* tool were used. DC P3700 system performance is configuration dependent. Random performance is collected with 4 workers
each with 32 QD.
4.
Average latency measured with 4KB sequential I/O at Queue Depth 1
5.
Active power measured during execution of Full Sequential Workload with 128KB transfer size, idle power is measured when there is no I/O to SSD.
6.
For suggested airflow please refer to the product specification document.
7.
Using JESD218 standard with JESD219 workload, Terabytes Written (TBW)
8.
SAS/SATA 6 Gbps SSDs are limited to typical throughput up to 550MB/s and 80k IOPS
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL
PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY
WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO
FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS OTHERWISE AGREED
IN WRITING BY INTEL, THE INTEL PRODUCTS ARE NOT DESIGNED NOR INTENDED FOR ANY APPLICATION IN WHICH THE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION
WHERE PERSONAL INJURY OR DEATH MAY OCCUR.
Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions
marked “reserved” or “undefined.” Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.
The information here is subject to change without notice. Do not finalize a design with this information.
Software and workloads used in performance tests may have been optimized for performance only on Intel microprocessors. Performance tests, such as SYSmark and MobileMark, are
measured using specific computer systems, components, software, operations and functions. Any change to any of those factors may cause the results to vary. You should consult other
information and performance tests to assist you in fully evaluating your contemplated purchases, including the performance of that product when combined with other products.
Performance tests and ratings are measured using specific computer systems and/or components and reflect the approximate performance of Intel products as measured by those tests. Any
difference in system hardware or software design or configuration may affect actual performance. Buyers should consult other sources of information to evaluate the performance of systems
or components they are considering purchasing. For more information on performance tests and on the performance of Intel products, go to:
http://www.intel.com/performance/resources/benchmark_limitations.htm.
The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized
errata are available on request. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Copies of documents which
have an order number and are referenced in this document, or other Intel literature, may be obtained by calling 1-800-548-4725, or by visiting Intel’s Web site at www.intel.com.
*Other names and brands may be claimed as the property of others.
Copyright © 2014 Intel Corporation. All rights reserved. Intel, the Intel logo, and Intel Inside are trademarks of Intel Corporation in the U.S. and other countries.
PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY
WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO
FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS OTHERWISE AGREED
IN WRITING BY INTEL, THE INTEL PRODUCTS ARE NOT DESIGNED NOR INTENDED FOR ANY APPLICATION IN WHICH THE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION
WHERE PERSONAL INJURY OR DEATH MAY OCCUR.
Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions
marked “reserved” or “undefined.” Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.
The information here is subject to change without notice. Do not finalize a design with this information.
Software and workloads used in performance tests may have been optimized for performance only on Intel microprocessors. Performance tests, such as SYSmark and MobileMark, are
measured using specific computer systems, components, software, operations and functions. Any change to any of those factors may cause the results to vary. You should consult other
information and performance tests to assist you in fully evaluating your contemplated purchases, including the performance of that product when combined with other products.
Performance tests and ratings are measured using specific computer systems and/or components and reflect the approximate performance of Intel products as measured by those tests. Any
difference in system hardware or software design or configuration may affect actual performance. Buyers should consult other sources of information to evaluate the performance of systems
or components they are considering purchasing. For more information on performance tests and on the performance of Intel products, go to:
http://www.intel.com/performance/resources/benchmark_limitations.htm.
The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized
errata are available on request. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Copies of documents which
have an order number and are referenced in this document, or other Intel literature, may be obtained by calling 1-800-548-4725, or by visiting Intel’s Web site at www.intel.com.
*Other names and brands may be claimed as the property of others.
Copyright © 2014 Intel Corporation. All rights reserved. Intel, the Intel logo, and Intel Inside are trademarks of Intel Corporation in the U.S. and other countries.
Printed in the USA 20141103 tlm
330591-002US