LevelOne 10/100BASE-TX to 100BASE-FX SMF SC PoE PD Converter 530053 Merkblatt

 

ProCon_FVT-0103TXFC/ 0104TXFC 

one world_one brand_one level_ 

 

 

 

100TX to 100FX-SC MM 
Converter w/POE Injector 

 

 

100TX to 100FX-SC SM 
Converter w/POE Injector

 

 

10/100Base-TX UTP to 100Base-FX fiber media 
conversion 

 

Complies with IEEE 802.3af POE standard 

 

Over-currant protection and Under-currant 
detection 

 

Choice of SC connectors for multi- and single-
mode 

 

DIP Switch to set configurations 

 

 

 

Standards Compliance 
IEEE 802.3/ IEEE 802.3u 
IEEE 802.3af Power Over Ethernet 

 

Connector 
10/100Base-TX: STP RJ-45 
100Base-FX: MM SC, SM SC 

 

50/125, 62.5/125 or 100/140m multi-mode 
8.3/125, 8.7/125, 9/125 or 10/125m single-mode 

 

100Mbps: 148,800 pps 
10Mpbs: 14,880 pps 

 

IEEE802.3x for full-duplex 
Backpressure flow control for half-duplex 

 

POE Power Reception Supports  
“Ethernet” via TP pin 1,2,3,6 
“Mid Span”: via TP pin 4,5,7,8 

 

LED Indicators 
Power, PoE, TP Link/Act, 100, FX Link/Act, FDX/COL 

 

Power Requirement  
60mA@-48VDC from IEEE802.3af PSE or PoE injector 

 

Temperature 
Operating: 0°C ~50°C 

 

Humidity 
5%~90% (RH) 

 

Dimension 
26.2(H) x 70.3(W) x 94(D) mm 

 

Certification 
FCC, CE

 

 

 

FVT-0103TXFC: 100TX to 100FX-SC Multi-Mode POE Converter 

 

FVT-0104TXFC: 100TX to 100FX-SC Single-Mode POE Converter (20km)

 

 

 FVT-0103TXFC and FVT-0104TXFC are new Power-over-

Ethernet-converters that transfer data from 10/100BaseTX copper to
fiber interfaces.  These POE Converters are designed to receive data
and power from POE networks and then to refer data out through
fiber connections thus eliminating extra power cables to extend the
usefulness of the network 

LevelOne’s POE converter complies with IEEE802.3af standard.  The
10/100 Base-TX port auto-senses 10 or 100Mbps connection speeds,
auto-negotiates half-/full-duplex modes, and auto-selects MDI-X
media type.  It comes in two models: FVT-0103TXFC with Multi-mode
SC connector and FVT-0104TXFC with Single-mode SC connector.
These converters will give your POE network the ability to interface
with fiber connections over a distance of up to 20km. 

With its compact design, our POE converters easily fit on any limited
space.  No software is required.  You can easily active this device by
simply connecting it to the network cable and it’s ready to go.

 

For more information, please contact your LevelOne representative, or visit www.level1.com 
All technical specifications are subject to change without notice.  
All mentioned brand names are registered trademarks and property of their owners