D-Link DNR-322L DNR-322L-PURX1TB Benutzerhandbuch

Produktcode
DNR-322L-PURX1TB
Seite von 4
Building Networks for People
©2012 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link, the D-Link logo, mydlink, ShareCenter, the D-Link RoHS logo and trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States and/or 
other countries. Other trademarks or registered trademarks are the property of their respective owners. Visit www.dlink.com for more details. 
Updated 10/11/12
U.S.A. | 17595 Mt. Herrmann Street | Fountain Valley, CA 92708 | 800.326.1688 | dlink.com     
DNR-322L
 mydlink™ Network Video Recorder
Technical Specifications
Supported Cameras
•  Supports all D-Link network cameras.
  Includes support for auto-discovery, and up  
  to 3 megapixel resolution.
Recording Performance
•  Max. capacity (NVR mode only):
•  H.264 1080P (bitrate): 90 Mbps
•  H.264 720P (bitrate): 90 Mbps
•  MJPEG 1080P (frame rate): 90 fps
•  MJPEG 720P (frame rate): 192 fps
•  Max. capacity (NVR+File Server mode):
•  H.264 1080P (bitrate): 68 Mbps
•  H.264 720P (bitrate): 68 Mbps
•  MJPEG 1080P (frame rate): 70 fps
•  MJPEG 720P (frame rate): 150 fps
Camera Search
•  UPnP
Audio & Video Recording
•   Synchronized audio & video recording
Compression Format
•  H.264, MPEG-4, M-JPEG (for supported
 cameras)
Video Settings
•  Resolution, quality, frame rate, enable
  audio, go to camera interface
Recording Type
•  Record by schedule, manual, and event-
  based recording
•  Motion-triggered recording
Remote Live View
•  Supported via IE Explorer
 (Max. 9 simultaneous channels)
•  Supports mydlink portal
 (Max. 1 simultaneous channel)
Network Service Protocols
•  IPV4, ARP, TCP, UDP, ICMP
•  DHCP Client
•  NTP Client (D-Link)
•  DNS Client
•  DDNS Client (D-Link)
•  SMTP Client
•  HTTP Server
•  PPPoE
•  UPnP
•  IP filtering
User Interface
•  IEEE 802.3/u/z
•  Auto MDI/MDI-X
•  SATA I, II
Hard Disk
1
•  Hard Disk control & management via PC
•  Reformat Disk
•  RAID 0
2
•  RAID 1
2
•  JBOD
Two Reset Modes
•  Reset firmware GUI button
•  HW reset button (hold for 5 seconds)
Flash Rom
•  128 MB
RAM
•  256 MB DDR II
Network Interface
•  Gigabit Ethernet LAN port
 (10/100/1000 Mbps)
I/O ports
•  RJ45 port
Remote Live View Control
•  Live view, preset/go, patrol, focus,  
  PTZ functions, snapshot, full screen,    
  digital zoom, e-map, multiple view    
 (1/4/6/9/16/25/36/48) with duplicated
 carrier
Remote Playback
•  Supported via IE and NVR client
•  Playback system with timeline GUI, search
  by event, area, cameras, date and time
•  Internet Explorer and NVR client support
  1-channel playback
•  Digital zoom
Overwrite Recording
•  Auto recycling when disk storage is full
File Export
•  Export videos to AVI or ASF file
•  Export images to BMP or JPG file
User Account
•  Additional accounts can be created to
allow user access to the system, and specify 
authorization for camera channels, PTZ, etc
System Time
•  Set the system time (D-Link NTP, input time,
  sync with computer, Daylight Saving Time)
DDNS
•  D-Link DDNS server support
Remote Backup
•  Remote software can backup raw data to
  redundant storage
•  Auto backup of previous day’s video to FTP
 server
System Status
•  Camera status, System status
•  Still picture EMAP support
•  DC-in jack
•  USB port for UPS status update (optional)
Power Adapter
•  DC 12V/4 A
Power Consumption
•  Max. power consumption: 25.20 W
•  Standby state max. power consumption:
 0.23 W
Dimension (w x d x H)
•  4.53 x 5.76 x 7.03 inches
 (115 x 146.4 x 178.5 mm)
Weight
•  0.875 kg (1.93 lbs)
Operating Temperature
•  0˚ to 55˚ C (32˚ to 131˚ F)
Storage Temperature
•  Operating: 5% to 90% (non-condensing)
Certifications
•  CE
•  FCC
•  RoHS
1
Amount of storage is dependent on number of cameras, resolution and frame rate. 
2
Hard drive(s) is not included. An internal 3.5” SATA 2.0 drive is required to store or share files and must be formatted before use. RAID 0 and RAID 1 require the use of two (2) SATA drives. To avoid drive incompatibility in RAID 0 or RAID 1 operation,
use SATA drives from the same manufacturer. Formatted drive capacity for RAID 1 operation is dependent on the drive capacity of the lower-sized drive. May not work with older generation SATA drives. For a list of SATA drives that have been
tested to work with the DNR-322L visit your D-Link office website. 
Only for cameras with PTZ functionality
4
Computer must adhere to Microsoft’s recommended system requirements.
5
Please visit the D-Link website for an updated list of supported cameras. 
6
1-Year Limited Warranty available only in the USA and Canada.