HP 767470-051 Benutzerhandbuch

If it is necessary to remove the display panel from the enclosure, remove the 4 Phillips PM2.0×3.0

screws (1) that secure the panel to the display enclosure, and then lift the top of the panel upward (2).
The raw display panel is available using spare part number 767448-001 for HD panels and 768053-001

for HD+ panels (HP 440 models only).

Rotate the display panel all the way over (1), disconnect the display cable from the rear of the panel (2),

and then remove the display panel (3) from the enclosure.

If it is necessary to replace the display hinges, remove the 6 Phillips PM2.0×3.0 screws (1) that secure

the display hinges to the display enclosure.

Component replacement procedures

93