Tycon Systems UPS-ST12-100 Datenbogen
Outdoor UPS System
Features
Up to 192W Maximum Continuous Output
12VDC, 24VDC and 48VDC systems
Isolates Equipment from Power Line Surges
High Performance GEL Sealed Lead Acid Batteries
Choice of 51Ah (600VA) to 204Ah (2400VA) Battery Capacity
Operating Temperature -30C to +60C
Weatherproof Nema 4X / IP65, UV Resistant, Locking Outdoor
Enclosure
Application
Description
The UPS
Pro™ ST outdoor UPS systems are designed to provide up to 192W backup power. There is enough backup
power to keep a wireless base station alive for many hours. The controller provides load control to make sure the
batteries don’t over-discharge. This greatly extends the life of the batteries. The load output is also regulated to be sure
that the voltage doesn’t exceed the maximum voltage allowed by the load. The system is powered from 120VAC or
240VAC power. In case of power failure the transition to battery power is seamless and automatic. Recovery is
automatic. The controller supports GEL/AGM or wet batteries. Systems are available without batteries to save on
international shipping costs.
batteries don’t over-discharge. This greatly extends the life of the batteries. The load output is also regulated to be sure
that the voltage doesn’t exceed the maximum voltage allowed by the load. The system is powered from 120VAC or
240VAC power. In case of power failure the transition to battery power is seamless and automatic. Recovery is
automatic. The controller supports GEL/AGM or wet batteries. Systems are available without batteries to save on
international shipping costs.
The weatherproof enclosure with security locks has multiple ports for CAT5 cable, solar and other cabling. It is vented
to prevent residual buildup of any hydrogen gas. The included bracket kit allows for the enclosure to be pole mounted
or wall mounted. The systems are rated to operate over a wide temperature range of -30C to +60C.
to prevent residual buildup of any hydrogen gas. The included bracket kit allows for the enclosure to be pole mounted
or wall mounted. The systems are rated to operate over a wide temperature range of -30C to +60C.
There are multiple system configurations available: 12V 51Ah(600VA), 12V
102Ah(1200VA), 12V 204Ah(2400VA), 24V 51Ah(1200VA), 24V 102Ah(2400VA)
and 48V 51Ah(2400VA) Battery.
102Ah(1200VA), 12V 204Ah(2400VA), 24V 51Ah(1200VA), 24V 102Ah(2400VA)
and 48V 51Ah(2400VA) Battery.
There is a generous amount of space reserved inside the enclosures for
customer electronics such as controllers, wireless AP or CPE cards, sensors,
inverters, etc. The standard component layout is designed for ease of
maintenance.
customer electronics such as controllers, wireless AP or CPE cards, sensors,
inverters, etc. The standard component layout is designed for ease of
maintenance.
Equipment runs on battery power which isolates it from power line surges which
is a main cause of outdoor equipment failure.
is a main cause of outdoor equipment failure.
The system is also compatible with the TPSK Solar panel kits. A TPW wind
turbine system can also be used as an alternate power source in addition to
solar and AC power.
turbine system can also be used as an alternate power source in addition to
solar and AC power.
Wireless Base Stations
Security Applications
Electric gates and fences
Cell Towers
DATA SHEET
UPS-ST12/24/48
UPSPro™
ST