Add-On Computer Peripherals (ACP) 1000Base-TX SFP GCOPPER-SFP-100-AO Benutzerhandbuch

Produktcode
GCOPPER-SFP-100-AO
Seite von 6
www.addoncomputer.com  
Phone:  877.292.1701  
 
1  
 
 
 
 
 
 
 
 
 
 
GCOPPER-­‐SFP-­‐100-­‐AO  
1.25Gbps  SFP  Copper  Transceiver  
 
Features  
•  Up  to  1.25Gb/s  bi-­‐directional  data  links  
•  Hot-­‐pluggable  SFP  footprint  
•  Extended  case  temperature  range  (0°C  to  +85°C)  
•  Fully  metallic  enclosure  for  low  EMI  
•  Low  power  dissipation  (1.05  W  typical)  
•  Compact  RJ-­‐45  connector  assembly  
•  Access  to  physical  layer  IC  via  2-­‐wire  serial  bus  
•  1000Base-­‐TX  operation  in  host  systems  with    
SERDES  interface  
•  10/100/1000Mbps  compliant  in  host  systems  with    
SGMII  interface  
 
 
 
Product  Description  
AddOn  Computer’s  GCOPPER-­‐SFP-­‐100-­‐AO,  Copper  Small  Form  Pluggable  (SFP)  transceiver  is  a  high  performance,  
cost  effective  module  compliant  with  the  Gigabit  Ethernet  and  1000-­‐  BASE-­‐T  standards  as  specified  in  IEEE  802.  
3-­‐2002  and  IEEE  802.3ab,  which  supporting  1000Mbps  data-­‐  rate  up  to  100  meters  reach  over  unshielded  
twisted-­‐pair  CAT  5  cable.  The  module  supports  1000  Mbps  (or  10/100/1000Mbps)  full  duplex  data-­‐links  with  5-­‐
level  Pulse  Amplitude  Modulation  (PAM)  signals.  All  four  pairs  in  the  cable  are  used  with  symbol  rate  at  
250Mbps  on  each  pair.  The  module  provides  standard  serial  ID  information  compliant  with  SFP  MSA,  which  can  
be  accessed  with  address  of  A0h  via  the  2wire  serial  CMOS  EEPROM  protocol.  The  physical  IC  can  also  be  
accessed  via  2wire  serial  bus  at  address  ACh.  
 
 
 
 
www.addoncomputer.com  
GCOPPER-­‐SFP-­‐100-­‐AO  
SIXNET  1000BASE-­‐TX  SFP    
COPPER  100M  REACH  RJ-­‐45