IRWIN 10502221 Merkblatt
100° TIP FOR FASTEST START
Most precise centering and guidance
Most precise centering and guidance
■
No walking, also on curved surfaces.
■
No centre punch necessary.
W9 HSS (HIGH SPEED STEEL)
■
Superb heat resistance.
■
Sharp cutting lips.
HARDENING
■
Superb wear resistance.
■
Hardness of 63-66 Rockwell C (HRC).
REINFORCED WEB
■
For added strength and durability.
■
Robust design –
no breakage.
no breakage.
GROUND FLUTE
■
Ground from solid.
■
Very exact tip geometry.
3-FLATTED SHANK
■
Prevents slipping in chuck.
■
No damaging of the drill due
to slipping.
to slipping.
■
Safe and strong clamping,
especially when using
keyless chucks.
especially when using
keyless chucks.
■
Best power supply to the
cutting lips – spend the power
where it‘s needed.
cutting lips – spend the power
where it‘s needed.
140° CUTTING SHOULDER FOR
SMOOTH FINISH
SMOOTH FINISH
■
Perfectly round holes.
■
Clean exit holes – minimized burrs.
■
Will not bind in multiple layers
of thin material.
of thin material.
JET POINT – REVOLUTIONARY
TIP DESIGN
Self centering, will not walk on
any surfaces.
TIP DESIGN
Self centering, will not walk on
any surfaces.
Application:
- For por table and cordless drills.
- Primarily designed for drilling
- Primarily designed for drilling
metal and sheet metal.
- Performs exceedingly well also
in all types of wood and plas-
tics.
tics.
- Can be used for drilling stain-
less steel in combination with a
lubricant.
lubricant.
Product:
TURBOMAX
■
Drill bit diameters available from 1 mm to 13 mm.
■
Drill bit total length available from 12 mm to 151 mm.
Key Fact Sheet
© 2007 IRWIN Industrial Tools, Turbomax
JET
POINT