Fujitsu TX300 S8 VFY:T3008SC010IN/R6 Datenbogen
Produktcode
VFY:T3008SC010IN/R6
Data Sheet
FUJITSU Server PRIMERGY TX300 S8 Tower Server
Page 4 / 10
www.fujitsu.com/fts
Memory notes
Max. 8 memory modules/CPU with UDIMM (low voltage or standard) OR quad-rank RDIMM; max. 12 memory
modules/CPU with single or dual-rank RDIMM or single, dual-rank or quad-rank Load-Reduced (LR) DIMM.
Memory Mirroring with identical modules in both channel pairs of a bank (4 modules per bank), Rank sparing or
Performance Mode with identical modules in all four channels (4 modules per bank).
modules/CPU with single or dual-rank RDIMM or single, dual-rank or quad-rank Load-Reduced (LR) DIMM.
Memory Mirroring with identical modules in both channel pairs of a bank (4 modules per bank), Rank sparing or
Performance Mode with identical modules in all four channels (4 modules per bank).
Memory options
4 GB (1 module(s) 4 GB) DDR3 LV, registered, ECC, 1600 MHz, PC3-12800, DIMM
8 GB (1 module(s) 8 GB) DDR3 LV, registered, ECC, 1600 MHz, PC3-12800, DIMM
8 GB (1 module(s) 8 GB) DDR3, registered, ECC, 1866 MHz, PC3-14900, DIMM
16 GB (1 module(s) 16 GB) DDR3 LV, registered, ECC, 1600 MHz, PC3-12800, DIMM
16 GB (1 module(s) 16 GB) DDR3, registered, ECC, 1866 MHz, PC3-14900, DIMM
32 GB (1 module(s) 32 GB) DDR3 LV, registered, ECC, 1600 MHz, PC3-12800, DIMM
64 GB (1 module(s) 64 GB) DDR3 LR, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (1 module(s) 8 GB) DDR3 LV, registered, ECC, 1600 MHz, PC3-12800, DIMM
8 GB (1 module(s) 8 GB) DDR3, registered, ECC, 1866 MHz, PC3-14900, DIMM
16 GB (1 module(s) 16 GB) DDR3 LV, registered, ECC, 1600 MHz, PC3-12800, DIMM
16 GB (1 module(s) 16 GB) DDR3, registered, ECC, 1866 MHz, PC3-14900, DIMM
32 GB (1 module(s) 32 GB) DDR3 LV, registered, ECC, 1600 MHz, PC3-12800, DIMM
64 GB (1 module(s) 64 GB) DDR3 LR, registered, ECC, 1333 MHz, PC3-10600, DIMM
Memory options
8 GB (1 module(s) 8 GB) DDR3, unbuffered, ECC, 1600 MHz, PC3-12800, DIMM
Interfaces
USB 2.0 ports
10 x USB 2.0 (2x front, 4x rear, 2x internal for backup devices, 1x USB stick, 1x USSD)
Graphics (15-pin)
2 x VGA (thereof 1x front optional)
Serial 1 (9-pin)
1 x serial RS-232-C, usable for iRMC S3 or system or shared
LAN / Ethernet
2 x Gbit/s Ethernet (RJ45) with upgrade options for additional 2x1 Gbit/s (RJ45), 4x 1 Gbit/s (RJ45) or 2x 10 Gbit/s
(SFP+)
(SFP+)
Management LAN (RJ45)
1 x dedicated management LAN port for iRMC S4 (10/100/1000 Mbit/s)
Management LAN traffic can be switched to shared onboard Gbit LAN port
or optional Modular LAN 2x10 Gbit controller
Front Service LAN port as option
Management LAN traffic can be switched to shared onboard Gbit LAN port
or optional Modular LAN 2x10 Gbit controller
Front Service LAN port as option
Onboard or integrated Controller
RAID controller
4 port for internal 3G SATA and SAS (as upgrade option with SAS enabling key) for HDDs with RAID 0/1/10 or SAS LTO
device (Intel C600)
additional RAID controller options are described under Components RAID controller
device (Intel C600)
additional RAID controller options are described under Components RAID controller
SATA Controller
Intel® C600, 2 x SATA channel for ODD
LAN Controller
Intel® Ethernet Controller I350, 2 x 10/100/1000 Mbit/s Ethernet (I/O acceleration), Modular integrated on-board LAN
offers upgrade options for additional 2x1 Gbit/s , 4x 1 Gbit/s or 2x 10 Gbit/s.
PXE-Boot via LAN from PXE server, iSCSI boot (also diskless)
offers upgrade options for additional 2x1 Gbit/s , 4x 1 Gbit/s or 2x 10 Gbit/s.
PXE-Boot via LAN from PXE server, iSCSI boot (also diskless)
Remote Management Controller
Integrated Remote Management Controller (iRMC S4, 256 MB attached memory incl. graphics controller)
IPMI 2.0 compatible
IPMI 2.0 compatible
GPU / Coprocessor
1-2 NVIDIA® Tesla™ K20 and K20X GPGPU
1-2 Intel® Xeon® Phi 3120P / 5110P / 7120P coprocessor
1-2 Intel® Xeon® Phi 3120P / 5110P / 7120P coprocessor
Trusted Platform Module (TPM)
Infineon / separate module; TCG V1.2 compliant (option)
Slots
PCI-Express 3.0 x4 (mech. x8)
2 x Full height (2nd processor required)
PCI-Express 3.0 x8
4 x Full height (1 is reserved for Modular RAID controller)
PCI-Express 3.0 x8 (mech. x16)
1 x Full height
PCI-Express 3.0 x16
2 x Full height (2nd processor required)
PCI-Express 2.0 x4 (mech. x8)
1 x Full height (2nd processor required)
Slot Notes
One PCIe Gen3 x8 slot may be occupied with a modular LAN controller if configured.
One PCIe Gen3 x8 slot may be occupied with a modular RAID controller if configured.
Important: 5 PCIe slots are supported with the first processor. 10 PCIe slots are supported with two processors.
Possible slot lenght is described in the relevant system configurator
One PCIe Gen3 x8 slot may be occupied with a modular RAID controller if configured.
Important: 5 PCIe slots are supported with the first processor. 10 PCIe slots are supported with two processors.
Possible slot lenght is described in the relevant system configurator
Storage drive bays
3.5-inch or 2.5-inch hot-plug SAS/SATA
Accessible drive bays
3 x 5.25/1.6-inch
Notes accessible drives
All possible options described in relevant system configurator.
Drive bays
Storage drive bays
Max 12 (4 + 4 + 4) x 3.5-inch
Max 24 (8 + 8 + 8) x 2.5-inch
Optional accessible drives
3x 5.25/1.6-inch bay for accessible devices (HDD: 4x 3.5-
inch hot-plug SAS/SATA or LTO drive)
inch hot-plug SAS/SATA or LTO drive)
3x 5.25/1.6-inch bay for accessible devices (HDD: 8x 2.5-
inch hot-plug SAS/SATA and LTO drive)
inch hot-plug SAS/SATA and LTO drive)
Number of fans
6