Fujitsu RX2540 M1 VFY:R2541SC040IN/R9 Datenbogen
Produktcode
VFY:R2541SC040IN/R9
Data Sheet
FUJITSU Server PRIMERGY RX2540 M1 Dual socket 2U rack server
Page 4 / 11
www.fujitsu.com/fts
Memory protection
Advanced ECC
Memory Scrubbing
SDDC (Chipkill™)
Rank sparing memory support
Memory Mirroring support
Memory Scrubbing
SDDC (Chipkill™)
Rank sparing memory support
Memory Mirroring support
Memory notes
Memory Mirroring with identical modules in both channel pairs of a bank (4 modules per bank), Rank sparing or
Performance Mode with identical modules in all four channels (4 modules per bank).
Performance Mode with identical modules in all four channels (4 modules per bank).
Memory options
8 GB (1 module(s) 8 GB) DDR4, registered, ECC, 2,133 MHz, PC4-2133R, DIMM, 1Rx4
8 GB (1 module(s) 8 GB) DDR4, registered, ECC, 2,133 MHz, PC4-2133R, DIMM, 2Rx8
16 GB (1 module(s) 16 GB) DDR4, registered, ECC, 2,133 MHz, PC4-2133R, DIMM, 2Rx4
32 GB (1 module(s) 32 GB) DDR4, registered, ECC, 2,133 MHz, PC4-2133P, LRDIMM, 4Rx4
8 GB (1 module(s) 8 GB) DDR4, registered, ECC, 2,133 MHz, PC4-2133R, DIMM, 2Rx8
16 GB (1 module(s) 16 GB) DDR4, registered, ECC, 2,133 MHz, PC4-2133R, DIMM, 2Rx4
32 GB (1 module(s) 32 GB) DDR4, registered, ECC, 2,133 MHz, PC4-2133P, LRDIMM, 4Rx4
Memory modules notes
1536 GB memory expected to be available Q1/2015, current max. memory capacity 768 GB
Interfaces
USB 2.0 ports
5 x USB 2.0 (2x rear, 1x front external, 1x USB stick, 1x uSSD)
USB 3.0 ports
5 x USB 3.0 (2x front, 2x rear, 1x internal for backup device)
Graphics (15-pin)
2 x VGA (thereof 1x front optional)
Serial 1 (9-pin)
1 x serial RS-232-C optional, usable for iRMC or system or shared
Management LAN (RJ45)
1 x dedicated management LAN port for iRMC S4 (10/100/1000 Mbit/s)
Management LAN traffic can be switched to shared onboard LAN port
Management LAN traffic can be switched to shared onboard LAN port
Onboard or integrated Controller
RAID controller
additional RAID controller options are described under Components RAID controller
SATA Controller
Intel® C612, 1 x SATA channel for ODD
LAN Controller
DynamicLoM based on Emulex XE100 series. All supported features are described in relevant system configurator.
PXE-Boot via LAN from PXE server, iSCSI / FCoE boot (also diskless).
PXE-Boot via LAN from PXE server, iSCSI / FCoE boot (also diskless).
Remote management controller
Integrated Remote Management Controller (iRMC S4, 256 MB attached memory incl. graphics controller)
IPMI 2.0 compatible
IPMI 2.0 compatible
Trusted Platform Module (TPM)
Infineon / separate module; TCG V1.2 compliant (option)
Slots
PCI-Express 3.0 x8
3 x Low profile (2nd processor required for slot 4)
PCI-Express 3.0 x16
3 x Low profile (2nd processor required for slot 5 and 6)
Slot Notes
First PCIe Gen3 x8 slot may be occupied with a Modular RAID controller if configured.
Important: 3 PCIe slots are supported with the first processor. 6 PCIe slots are supported with two processors.
PCIe riser card options can expand number of slots by two (max. 8 in total) and support max. 4 full height slots.
Possible slot length described in relevant system configurator.
Important: 3 PCIe slots are supported with the first processor. 6 PCIe slots are supported with two processors.
PCIe riser card options can expand number of slots by two (max. 8 in total) and support max. 4 full height slots.
Possible slot length described in relevant system configurator.
Drive bays
Storage drive bays
3.5-inch or 2.5-inch (rear option avail. 02/2015) hot-plug SAS/SATA
Accessible drive bays
1 x 5.25/0.4-inch for CD-RW/DVD
Notes accessible drives
All possible options described in relevant system configurator.
Optional hard disk bays
4x 2.5-inch hot-plug SAS/SATA rear option
Drive bays (Base unit specific)
Storage drive bays
8 x 3.5-inch hot-plug SAS/SATA
12 x 3.5-inch hot-plug SAS/SATA
Accessible drive bays
1 x 5.25/0.4-inch for CD-RW/DVD
Optional accessible drives
ODD 5.25” possible
ODD 5.25” not possible
General system information
Number of fans
5
Fan configuration
redundant / hot-plug
Fan notes
4+1 redundant
Operating panel
Operating buttons
On/off switch
Reset button
NMI button
ID button
Reset button
NMI button
ID button