Cisco 10GBASE-ER XENPAK Module for SMF XENPAK-10GB-ER+= Datenbogen

Produktcode
XENPAK-10GB-ER+=
Seite von 6
 
 
Data Sheet 
© 2008-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. 
Page 2 of 6 
mode conditioning patch cord is required for applications over OM3.  For additional 
information on mode conditioning patch cord requirements please see: 
http://www.cisco.com/en/US/prod/collateral/modules/ps5455/product_bulletin_c25-
530836.html
 
Cisco XENPAK-10GB-SR: Supports a link length of 26m on standard FDDI grade MMF. 
Up to 300m link lengths are possible when using 2000 MHz/km MMF (OM3). 
 
Cisco XENPAK-10GB-LR / -LR+: Supports a link length of 10 km on standard single-mode 
fiber (SMF) (G.652). 
 
Cisco XENPAK-10GB-ER / -ER+: Supports a link length of up to 40 km on SMF (G.652). 
 
Cisco XENPAK-10GB-ZR: Supports link lengths of up to about 80 km on SMF. This 
interface is not part of the 10 Gigabyte Ethernet standard but is built according to Cisco 
optical specifications. 
 
Cisco XENPAK-10GB-LW (WAN PHY): Supports a link length of 10 km on standard 
single-mode fiber (SMF) (G.652). WAN-PHY is intended to allow the transport of 10 Gigabit 
Ethernet over a traditional SONET/SDH infrastructure by rendering 10 Gigabit Ethernet 
compatible with SONET STS-192c format and data rate, as defined by ANSI, as well as the 
SDH VC-4-64c container specified by ITU. 
Technical Specifications 
Platform Support 
Cisco XENPAK modules are supported on Cisco switches and routers. For more details, refer to 
the document Cisco XENPAK/X2 Compatibility Matrix. 
Connectors and Cabling 
Connectors: 
 
XENPAK-10GB-CX4: InfiniBand 4x connector 
 
All others: Dual SC/PC connector 
Note:  
  Only connections with patch cords with PC or UPC connectors are supported. Patch 
cords with APC connectors are not supported. All cables and cable assemblies used must be 
compliant with the standards specified in the standards section. 
Table 1 provides cabling specifications for the Cisco XENPAK modules. 
Table 1. 
XENPAK Port Cabling Specifications 
Product 
Wavelength 
(nm) 
Cable Type 
Core Size 
(micron) 
Modal 
Bandwidth 
(MHz/km) 
Cable 
Distance*  
Cisco XENPAK-10GB-CX4  
–  
CX4 (copper)   –  
–  
15m  
Cisco XENPAK-10GB-LX4  
1310  
MMF  
62.5  
50.0  
50.0  
500  
400  
500  
300m  
240m  
300m  
Cisco XENPAK-10GB-LRM 
1310 
MMF 
62.5  
50.0  
50.0  
500  
400  
500  
220m  
100m  
220m