3M Rapid 50642-00000 Merkblatt

Bonds metal, wood, masonry, ceramics, glass, dry concrete, chipboard, 

leather, cardboard, fabric, rubber and most plastics (except polyethylene, 

polypropylene, Teflon®).

Make sure surfaces are clean and free from dust, corrosion, dirt and grease. 

For optimum bonding, slightly roughen surfaces with sandpaper and degrease 

metals with a suitable solvent. During assembly apply light pressure to the joint 

until set (clamps, tape around 20 minutes. Allow 3 hours to attain full strength 

before rough handling or sanding.

 

Araldite® Rapid is a strong 2-component epoxy with fast setting. Parts 

repositionable for 4 minutes. Oil, chemical and impact resistant. High 

temperature resistance (-30°C to 65°C). Do not use to repair or bond items that 

will contact food or drink. Not recommended for bonding rearview mirrors to car 

windscreens.

Should be stored in a dry place at room temperature in the original tubes.

Environmentally friendly product formulation.

Copyright

©

 2011. Huntsman 

Advanced Materials (Switzerland) 

GmbH. All Rights Reserved.

Araldite

®

 is a registered trademark 

of Huntsman Corporation or an 

affiliate thereof in one or more, but 

not all countries.