LevelOne IES-0830 IES0830 Merkblatt

LevelOne IES-0830 Industry Ethernet Switch provides 8 ports of 

10/100Base-TX Ethernet to enable high speed network at 

mission-critical environment. This device is designed to be mounted on 

an industry standard DIN-rail, plus the clearly visible status LEDs provide 

simple monitoring of port link activity.

All components are built to withstand harsh environment applications 

without compromise where humidity, temperature variation and even 

shock vibration are concerns, including Electric & Utility, Critical 

Infrastructure, Transportation and Surveillance Security. This device 

operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature.

- Provides flexibility of 8 10/100BASE-TX ports

- Supports 10/100Mbps-Full/Half-duplex, Auto-Negotiation, 

   Auto-MDI/MDIX

- Redundant power inputs(12-48VDC) with Terminal Block and DC 

   Jack(12VDC)

- Alarms for power and port link failure by relay output

- Supports DIP switch configuration for link down alarm

- -40°C to 75°C (-40°F to 167°F) operating temperature range, tested for 

   functional operation @ -40°C to 85°C (-40°F to 185°F)

- Provides DIN-rail or panel mounting 

- Complies with NEMA TS2 Environmental requirements for Traffic 

   control equipment

- Complies with IEC61000-6-2 EMC Generic standard immunity for 

   Industrial environment

- Complies with IEC61850-3 and IEEE1613 Environmental requirements 

   for power substation automation systems

- Complies with EN50121-4 environmental requirement for Railway 

   application

This redundant power system is designed to meet the challenge of 

power failure to ensure reliability and constant availability. Single power 

design works fine in non-critical network applications, but it falls short 

drastically for network applications in transportation, automate 

production or banking.

This unmanaged Industrial Ethernet Switch is designed for the 

demanding industrial environments at businesses in need of instant 

connectivity with no setup or configure required, truly plug and play.

This device is certified by NEMA (National Manufacturers Association) 

TS2 Environmental requirements for the Traffic Control Equipment that 

withstand extreme temperatures, operating voltage and humidity 

fluctuation, vibration and shock commonly experienced in severe 

outdoor environments.

This device is complied with IEC 61850-3 / IEEE 1613 for the power 

substations and EN 50121-4 for the railway applications. IEC 61850-3 is 

an international standard for electrical substation systems. The standard 

enables integration of all control, measurement, monitoring and 

protection functions within a substation.

Unit: mm

Side

Buttom

Top

Back

Front

 

60

125

14

5