IMC Networks IE-MiniFiberLinX-II, TP-TX/SSFX-SM1310-SC (1310xmt/1550rcv) + AC Adapter 856-19752 Benutzerhandbuch
Produktcode
856-19752
General
•
Preserves complete end-to-end fiber
connection integrity
•
Bi-directional bandwidth control
•
Read/write IEEE 802.1Q VLAN-tags
•
Supports Extra Tagging (Q-in-Q)
•
QoS: IEEE 802.1p-based packet pri-
oritization (2 queues [high/low] with 8
levels of priority)
levels of priority)
•
Layer 2 packet switching, store and for-
ward operation
•
Forwarding rate: 14,880pps for 10
Mbps; 148,800pps for 100 Mbps;
•
AutoCross for MDI-II/MDI-X
•
Features Auto-Negotiation and
Selective Advertising
•
Supports Half and Full-Duplex operation
•
MTU: Supports over-sized packets up to
1916 bytes per packet
Security
•
Password Control
•
Multiple Access Levels: User Assigned
Accounts & Access Levels
Management
•
SNMP V1 and V2c compatible
•
Includes GUI-based iView² software for
remote management and upgrades
•
Monitors far-end (remote) status without
a physical presence or separate con-
nection
nection
•
IEEE 802.3x Flow Control
•
Includes DHCP and TFTP clients
•
Supports Telnet
•
Includes loopback test modes (MAC
swap)
•
Includes LinkLoss and FiberAlert
•
Supports the Unified Management
Agent (UMA)
•
Includes status LEDs
•
RS-232 (Craft) interface for local man-
agement
•
Serial cable for direct connection to a
PC’s Serial Port
Ethernet Types Supported
•
IEEE 802.3i 10Base-T twisted pair
•
IEEE 802.3u 100Base-TX twisted pair
•
IEEE 802.3u 100Base-FX or SX fiber
Technical Specifications
Network operators can deploy a single
IE-MiniFiberLinX-II in stand-alone applications.
IE-MiniFiberLinX-II in stand-alone applications.
At the Central Office (CO), a fiber switch connects
via a fiber cable to the IE-MiniFiberLinX-II at the
customer premises. The IE-MiniFiberLinX-II can
be managed from the CO over SNMP or Telnet.
via a fiber cable to the IE-MiniFiberLinX-II at the
customer premises. The IE-MiniFiberLinX-II can
be managed from the CO over SNMP or Telnet.
The IE-MiniFiberLinX-II is very versatile and
offers a range of AC and DC powering options.
It also supports 802.3af powering functionality,
allowing it to act as a Powered Device (PD).
offers a range of AC and DC powering options.
It also supports 802.3af powering functionality,
allowing it to act as a Powered Device (PD).
The IE-MiniFiberLinX-II can be powered from
a PSE-enabled wireless Access Point, which in
turn can be powered by a remote source such
as the solar panels on a street light. The data
is transmitted over fiber to an iMediaChassis/20
with iMcV modules in the Central Office to form an
end-to-end managed system.
a PSE-enabled wireless Access Point, which in
turn can be powered by a remote source such
as the solar panels on a street light. The data
is transmitted over fiber to an iMediaChassis/20
with iMcV modules in the Central Office to form an
end-to-end managed system.
Typical Application— Single
IE-MiniFiberLinX-II Solution
IE-MiniFiberLinX-II Solution
Application Examples
(cont.)
Typical Application— Powering
Options
Options
NID Application
Networking
RoHS Compliant
Fiber Types Supported
•
50/125µm or 62.5/125µm multi-mode fiber
•
9/125µm single-mode fiber
•
Single-strand fiber or CWDM
Connectors: RJ-45, and ST or SC Includes
DIN clips for mounting
Shipping Weight: 0.30 lbs (0.11 kg)
Dimensions: 0.83”H x 1.80”W x 3.35”D (2.11 x
4.57 x 8.51 cm)
Environmental
•
Humidity: 5 - 95% (non-condensing)
•
Operating Temperature: -49° to +158°F (-35°
to +70°C) excluding AC wall adapter; with
AC wall adapter: 32° to 122°F (0° to
AC wall adapter: 32° to 122°F (0° to
40°C)
•
Storage Temperature: -49° to 185° F (-45°
to +85° C)
Power
•
AC Wall Adapter: 100/240 ±10% VAC input,
5VDC output
•
DC Input Voltage: 750mA@5V
•
IEEE 802.3af Power over Ethernet
Physical Specifications