Omnitron iConverter 10/100M2 8903N-1-W Benutzerhandbuch
Produktcode
8903N-1-W
iConverter
iConverter
®
■ Carrier-Grade optical Ethernet Network Interface Device
■ Integrated SNMPv1, SNMPv2c, SNMPv3 and IP-less
802.3ah management
■ 802.3ah Link OAM for early fault detection and
performance monitoring
■ VLAN with 802.1ad Q-in-Q for E-Line and E-LAN
services
■ Quality of Service for Voice/Data/Video over Ethernet
■ Bandwidth control (rate limiting) with 64Kb increments
■ Port MIB statistics and optical performance statistics to
support Service Level Agreements
■ Port Access Control for enhanced security
■ 2,048 byte Jumbo frames
■ Layer 2 Control Protocol (L2CP) Policy Control
■ Configurable Link Fault Propagation modes
■ Small Form Pluggable (SFP) transceivers with Optical
Statistics for standard or CWDM applications
■ Fixed-fiber connectors available for multimode and
single-mode dual fiber and single-mode single-fiber
■ UTP auto-crossover and auto-negotiation of data
rate, duplex modes and pause capabilities
■ Commercial (0 to 50
O
C), wide (-40
O
to 60
O
C) and
extended (-40
O
to 75
O
C) temperature ranges
■ MEF 9 and 14 Certified Compliant
■ NEBS Level 3 Compliant
■ Lifetime Warranty and free 24/7 Technical Support
iConverter
10/100M2
10/100BASE-TX UTP to 100BASE-FX Media Converter and Network Interface Device
The iConverter 10/100M2 conforms to the Ethernet in the
First Mile (EFM) fiber standards to support Fiber-to-the-X
Metropolitan and Enterprise LAN networks. The 10/100M2
provides intelligent, securely managed service demarcation
at the customer premises, offering Layer 2 Control Protocol
(L2CP) policy control, Quality of Service and enhanced
Bandwidth Control (rate-limiting) capabilities. The 10/100M2
features built-in Operations, Administration and Maintenance
(OAM) with comprehensive performance monitoring, fault
detection and provisioning.
The 10/100M2 is available as a compact standalone unit or as
The 10/100M2 is available as a compact standalone unit or as
a chassis plug-in module. The hot-swappable 10/100M2 plug-in
module can be mounted in a 19 or 5-Module chassis with any
combination of redundant AC and DC power supplies. It can
also be mounted in a 2-Module AC or DC powered chassis, or
in a 1-Module chassis with AC or DC power input.
The plug-in module can manage other modules in the same
The plug-in module can manage other modules in the same
chassis and operate as a managed 10/100 media converter.
It features two Ethernet backplane ports for connectivity to
adjacent modules in a chassis for multi-port and multi-service
configurations.
The standalone 10/100M2 is available as a tabletop or wall-
The standalone 10/100M2 is available as a tabletop or wall-
mount unit. The tabletop model can be DIN-rail mounted using
an optional DIN-rail mounting kit. Both the tabletop and the
wall-mount models are DC powered and are available with an
external AC/DC power adapter or a terminal connector for DC
power. The 10/100M2 standalone unit combines management
capability with a compact chassis for deployment at the
demarcation point.
KEY FEATURES
CARRIER-GRADE OPTICAL ETHERNET
iConverter fiber access Network Interface
Devices and media converters are MEF 9
and 14 certified compliant and NEBS Level
3 compliant. iConverter NIDs enable Carrier-
Grade Optical Ethernet with reliability and
performance monitoring to support Service
Level Agreements (SLAs).
The modular design of iConverter fiber access
The modular design of iConverter fiber access
equipment future-proofs Metro Ethernet
services with scalability of network services
and lowers operating costs with comprehensive
OAM management and provisioning.