Clarion NX702E NX 702E Benutzerhandbuch
Produktcode
NX 702E
11
English
NX702E
Installing The GPS Antenna
WARNING
• Do not install the GPS antenna in a place where it may interfere with the operation of the
airbag or hinder the driver’s visual range.
• Do not use the navigation system with the GPS antenna cord cut off. The power cables in the
cord may be short-circuited.
Note:
• The supplied GPS antenna is for installing inside the vehicle. Do not install it outside the
vehicle.
• Install the GPS antenna more than 50 cm away from the main unit, other audio devices such
as CD player, and a radar detector. If it is installed near these devices, GPS reception may be
impaired.
impaired.
• To improve the GPS signal reception, install the GPS antenna horizontally on a flat plane.
• Do not wax or paint the cover of the GPS antenna. This may reduce the performance of the
• Do not wax or paint the cover of the GPS antenna. This may reduce the performance of the
GPS antenna.
• Install the GPS antenna at least 10 cm away from the windshield.
• Wipe off the dirt of the mounting surface before installing the GPS antenna.
• Wipe off the dirt of the mounting surface before installing the GPS antenna.
GPS antenna
• Mount the GPS antenna.
Stick it surely on a flat plane of
the passengerside dashboard
where GPS signal interruption is
minimized.
• Wire the GPS antenna cord.
Fasten the cord using the cord
holders.
Cord holder
Double-sided tape
Bottom face of the GPS antenna
• Stick the double-sided tape to the bottom
face of the GPS antenna.
Installation Guide
Installing The Digital TV Antenna
1. Peel the separator film in the glass pasting
up side of antenna.
Installation Guide
Metal terminal
The mark of attachement position
6. Connect the signal cable to the unit.
5. Stick an amplifier part on the feeding
terminal part of the element.
Please match the mark of the amplifier
part with the position of the element like a
photograph, and please stick it.
4. Please tear off the separator of the
amplifier part slowly.
At this time,Please do not touch the metal
terminal of the amplifier part with your bare
hands.
3. Peel off a separator film carefully slowly.
2. Stick an element on a windshield. Please
stick it so that an element sticks to
windshield enough.
Stick the black side of the element on glass.