IMC Networks PD-Switch, TX/3 + TX/FX-SM1310/LONG-SC 852-16449 Merkblatt
Produktcode
852-16449
800-624-1070
www.imcnetworks.com
M
EDIA
C
ONVERSION
M
EDIA
C
ONVERSION
RoHS Compliant
Features and Benefits
Multi-port switch powered by the
IEEE 802.3af Power Over Ethernet
Standard
IEEE 802.3af Power Over Ethernet
Standard
PD accepts power from any network
device providing PoE
Multiple ports increase network port
density
device providing PoE
Multiple ports increase network port
density
Meets a multitude of installation
requirements
requirements
SFP and fiber port configurations
(optional) for different network
environments
All RJ-45 ports feature Auto-Cross and
Auto-Negotiation
VoIP port for High Priority traffic
Available with ST or SC fiber
connectors
Optional single-strand fiber model
(optional) for different network
environments
All RJ-45 ports feature Auto-Cross and
Auto-Negotiation
VoIP port for High Priority traffic
Available with ST or SC fiber
connectors
Optional single-strand fiber model
Full-Featured Switch
Broadcast Storm Protection helps
control excessive broadcast traffic
DiffServ on all ports provides quality of
service prioritization
Far End Fault provides notification of
Link Loss on all fiber ports
One High-Priority Port ("VoIP" port)
Supports 1,916 byte Packet Size
control excessive broadcast traffic
DiffServ on all ports provides quality of
service prioritization
Far End Fault provides notification of
Link Loss on all fiber ports
One High-Priority Port ("VoIP" port)
Supports 1,916 byte Packet Size
•
•
•
•
•
•
•
•
•
•
•
•
•
•
PoE-Powered, Network-Extending Multi-Port Switch
PD-Switch
PD-Switch combines flexible copper and fiber interface options with
port and packet-based traffic prioritization while extending network
range by utilizing Power over Ethernet (PoE) technology
port and packet-based traffic prioritization while extending network
range by utilizing Power over Ethernet (PoE) technology
Application Example
The PD-Switches has been connected to a central (PoE) PSE-Switch, extending the range of the network and
increasing port density by using a combination of RJ-45 ports and fiber ports.
increasing port density by using a combination of RJ-45 ports and fiber ports.
The (PoE) PD-Switch is a full-featured, 5-port MAC layer
switch that extends the range of Ethernet networks, and
increases port density, while being powered via IEEE
802.3af-compliant PoE through its "PD-port" (eliminating
the need to run a separate power line for the device).
Ethernet cabling usually runs only 100 meters; through
the use of the PD-Switch, the outer range of an Ethernet
network can be extended by an additional 100 meters.
switch that extends the range of Ethernet networks, and
increases port density, while being powered via IEEE
802.3af-compliant PoE through its "PD-port" (eliminating
the need to run a separate power line for the device).
Ethernet cabling usually runs only 100 meters; through
the use of the PD-Switch, the outer range of an Ethernet
network can be extended by an additional 100 meters.
With multiple port configurations, the PD-Switch provides
a variety of port options while increasing port density.
PD-Switches come equipped with one "PD" RJ-45 port
and either:
a variety of port options while increasing port density.
PD-Switches come equipped with one "PD" RJ-45 port
and either:
Four RJ-45 data ports
Three RJ-45 data ports and one SFP data port
Two RJ-45 data ports and one fiber data port
Three RJ-45 data ports and one SFP data port
Two RJ-45 data ports and one fiber data port
•
•
•
•
•