Brodit ProClip 854787 854787 Merkblatt
Produktcode
854787
1.
2.
INSTALLATION INSTRUCTIONS
4.
3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Loosen the screw to the
lower right of the air vent. Remove the screw on the upper left of the air vent. Peel off the cover of adhesive tape
on the ProClip.
2. Use your fingers on your left hand to pull the part of the panel frame below the stereo a little bit towards you.
Press the curved edge on the lower part of the ProClip into the gap. Flip the ProClip forward and adjust it
sideways so the upper part aligns with the open screw hole. Release the pull on the panel from your left hand.
3. Secure the top part of the ProClip with the screw.
4. The ProClip is in place.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Loosen the screw to the
lower right of the air vent. Remove the screw on the upper left of the air vent. Peel off the cover of adhesive tape
on the ProClip.
2. Use your fingers on your left hand to pull the part of the panel frame below the stereo a little bit towards you.
Press the curved edge on the lower part of the ProClip into the gap. Flip the ProClip forward and adjust it
sideways so the upper part aligns with the open screw hole. Release the pull on the panel from your left hand.
3. Secure the top part of the ProClip with the screw.
4. The ProClip is in place.
2 (2)