Greenlee NC-500 Benutzerhandbuch

2

The NETcat

®

 Pro wiring tester is a device that verifies twisted pair and coaxial cables. It uses 

TDR technology to measure distance to fault and lengths of cable. It also has a feature that 

enables detection of an active network device partner (PC/HUB).
Additional features include the following:

Employs touch panel LCD with contrast adjustment and backlight.

•

Tests shielded twisted pair (STP), unshielded twisted pair (UTP), and coaxial cables.

•

Measures cable length using TDR technology.

•

Generates four different tones for cable tracing purpose.

•

Identifies active network device (PC/HUB) on 10/100/1000 BaseT networks displaying 

•

device capabilities.
Indicates presence of a PoE (Power over Ethernet) source device.

•

Verifies wiremaps.

•

Detects shorts, opens, reversed polarity, crossed pairs, and split pairs.

•

Uses remote ID units for Office Identification.

•

Library with typical NVP values for common cables.

•

Memo Pad feature for short notes or reminders.

•

Safety is essential in the use and maintenance of Greenlee tools and equipment. This instruc-

tion manual and any markings on the tool provide information for avoiding hazards and 

unsafe practices related to the use of this tool. Observe all of the safety information provided.

This instruction manual is intended to familiarize all personnel with the safe operation and 

maintenance procedures for the Greenlee NC-500 NETcat

®

 Pro. Keep this manual available 

to all personnel. Replacement manuals are available upon request at no charge  

at www.greenlee.com.