TP-LINK PoE Injector TL-POE150S Benutzerhandbuch

 

3 

 

You can use TL-POE150S PoE Injector with PD or PoE Splitter 
to expand your network to where there are no power lines or 
outlets, where you wish to fix devices such as APs, IP Cameras 
or IP Phones, etc. The following steps will tell you how to 
connect the PoE Injector correctly. 
1.  Use a CAT5 UTP cable to connect port of Ethernet device 

(such as a switch, hub or router) to the LAN IN port. 

2. Please connect the power adapter properly to a power 

socket with provided power cable, and then connect the 
other end of the power adapter to the DC 48V port of the 
TL-POE150S.  

3. Connect the POWER+DATA OUT port of the TL-POE150S 

to a PD or a PoE Splitter with CAT 5 UTP cable. 

Now, the device can work normally with data and power. 
There are two schemes to realize the PoE.   
1.  If the device supports PoE (take an IP camera with PoE for 

example), following topology will work: 

LAN IN: Connect to a
network device (such as a 
Switch or Router ) with 
CAT5 UTP cable.

DC 48V: Connect to the 
provided power adapter 
which can supply steady 
power of 48V DC. 

PWR: Power LED, a steady green
light indicates that the PoE system has
detected the PD or PoE Splitter and
the power adapter is working properly.