Marmitek POWERMID 300XTRA IR TRANSMITTER 08159 Benutzerhandbuch

Produktcode
08159
Seite von 32
ENGL
ISH
3
Powermid 300 XTRA™ 
SAFETY WARNINGS
•  
To prevent short circuits, this product should only be used inside and only in dry spaces. 
Do not expose the components to rain or moisture. Do not use the product close to a 
bath, swimming pool etc.
•  
Do not expose the components of your systems to extremely high temperatures or bright 
light sources.
•  
Do not open the product: the device contains live parts. The product should only be 
repaired or serviced by a qualified repairman.
•  
In case of improper usage or if you have opened, altered and repaired the product yourself, 
all guarantees expire. Marmitek does not accept responsibility in the case of improper 
usage of the product or when the product is used for purposes other than specified. 
Marmitek does not accept responsibility for additional damage other than covered by the 
legal product responsibility.
•  
Only connect the adapter to the mains after checking whether the mains voltage is the 
same as the values on the identification tags. Never connect an adapter or power cord 
when it is damaged. In that case, contact your supplier.
1. INTRODUCTION
Congratulations on purchasing a Powermid 300 XTRA™. This can be used to operate your 
A/V equipment with your own remote control, even the equipment is stored in a closed 
cabinet, located on the other side of the room or even in another room entirely! The compact 
design means that the Powermid 300 XTRA™ is suitable for use in every interior.
Marmitek products are manufactured with the utmost care and are exceptionally high 
quality. Please read this manual carefully and follow the instructions in order to get the best 
from this product.
2. SET CONTENTS
1x IR Receiver
1x IR Transmitter 
1x USB power adapter
1x Micro USB cable
2x AAA alkaline batteries
1x Instruction manual
20574_20121210_UG_124x176mm_80g_Powermid_300_XTRA_6_languages.indd   Sec1:3
28-02-13   17:13