Rigol DS2202A-S 2-channel oscilloscope, Digital Storage oscilloscope, DS2202A-S Benutzerhandbuch
Produktcode
DS2202A-S
RIGOL
DS2000A User’s Guide
12-16
To Edit Waveform
Users can edit the waveform stored. Press Edit to enter the waveform editing menu.
1. Interp
Press Interp to turn on or off the interpolation mode between the points of the
waveform.
ON: the waveform editor connects two points using a straight line.
OFF: the waveform editor will keep a constant voltage level between the
waveform.
ON: the waveform editor connects two points using a straight line.
OFF: the waveform editor will keep a constant voltage level between the
two points and create a ladder-like waveform.
2. Zoom
Press Zoom to turn on or off the zoom function.
ON: the waveform editing window only displays the current point.
OFF: the waveform editing window displays all the initial points.
ON: the waveform editing window only displays the current point.
OFF: the waveform editing window displays all the initial points.
3. Current Point
Press CurPoint and use
or the navigation knob to select the point to be
edited. The range is from 1 to the initial points.
4. Voltage
Press Voltage to set the voltage of the current point. The range is from -2.5 V to
+2.5 V.
+2.5 V.
5. Time
Press Time to set the duration of the current point. This setting is limited by the
times of the previous point and following point. The time of point 1 is fixed at 0 s.
times of the previous point and following point. The time of point 1 is fixed at 0 s.
6. Insert
Press Insert to insert a new waveform point between the current point and the
next point.
next point.
7. Delete
Press Delete to delete the current point from the waveform and connect the
remaining points using the current interpolation mode. Note that point 1 can not
be deleted.
remaining points using the current interpolation mode. Note that point 1 can not
be deleted.