Rigol DS2202A-S 2-channel oscilloscope, Digital Storage oscilloscope, DS2202A-S Benutzerhandbuch
Produktcode
DS2202A-S
RIGOL
DS2000A User’s Guide
13-7
External Storage and Recall
Before using external storage and recall, make sure that the USB storage device is
connected correctly. External storage supports all the types of files in Storage but in
recall, “Picture” and “CSV” are not supported.
1. Save the specified type of file in the external USB storage device.
1) Connect the signal to the oscilloscope and obtain stable display.
2) Press Storage Storage to select “CSV” and press Save to turn on the
2) Press Storage Storage to select “CSV” and press Save to turn on the
interface as shown in Figure e. Use
to select “Disk D” and press down
to open the USB storage device (Figure f).
Figure e
3) As shown in Figure f, use
to select the desired storage position. The file
can be stored under the root directory or in a certain folder under the root
directory of the USB storage device.
directory of the USB storage device.
Figure f
4) After the storage position is selected, press New File to turn on the
interface as shown in Figure g. Refer to the descriptions in