Rigol DS2202A-S 2-channel oscilloscope, Digital Storage oscilloscope, DS2202A-S Benutzerhandbuch
Produktcode
DS2202A-S
RIGOL
DS2000A User’s Guide
1-22
Note: In slope trigger, runt trigger and windows trigger, there are two trigger
level labels (
and
).
12. CH1 Vertical Scale
Display the voltage value per grid of CH1 waveform vertically.
Use VIRTICAL
SCALE to modify this parameter.
The following labels will be displayed according to the current channel
setting: channel coupling (e.g.
), input impedance (e.g. ) and
bandwidth limit (e.g. ).
13. CH2 Vertical Scale
Display the voltage value per grid of CH2 waveform vertically.
Use VIRTICAL
Use VIRTICAL
SCALE to modify this parameter.
The following labels will be displayed according to the current channel
setting: channel coupling (e.g. ), input impedance (e.g. ) and
bandwidth limit (e.g. ).
14. Source 1 Waveform
Display the current waveform type in Src1 Setup.
When the impedance of the source is set to 50 Ω,
When the impedance of the source is set to 50 Ω,
is displayed at the
right of Source 1 Waveform.
When modulation is turned on,
is displayed at the right of Source 1
Waveform.
Only applicable to DS2000A-S.
15. Source 2 Waveform
Display the current waveform type in Src2 Setup.
When the impedance of the source is set to 50 Ω,
When the impedance of the source is set to 50 Ω,
is displayed at the
right of Source 2 Waveform.
When modulation is turned on,
is displayed at the right of Source 2
Waveform.
Only applicable to DS2000A-S.
16. Message Box
Display prompt messages.
17. Notification Area
Display system time, sound icon and USB storage device icon.
System Time: displayed in “hh:mm (hour:minute)” format. When printing
System Time: displayed in “hh:mm (hour:minute)” format. When printing
or storing the waveform, the output file will contain this time message.
Press Utility System
System Time to set through the following
format:
yyyy-mm-dd hh-mm-ss (year-month-date hour-minute-second)
Sound Icon: when sound is enabled, will be displayed. Press Utility
Sound to enable or disable the sound.
USB Storage device Icon: when a USB storage device is detected,
will
be displayed.