Ziehl MINIPAN 300 AC Digital panel-mounted measuring device MINIPAN 300 AC 1 mV - 500 V/AC / 1 mA - 1 A Assembly dimensi D 440320.CO Datenbogen
Produktcode
D 440320.CO
date / name ) : 06.09.07 WL / Fz/Fu
Z. Nr.: 12110-0710-01
Page 4 of 12
Type: Minipan 300
ZIEHL industrie-elektronik GmbH + Co KG, Daimlerstr.13, D-74523 Schwäbisch Hall, Tel.: +49 791 504-0, Fax: -56, e-mail: info@ziehl.de
(1)
(2)
(3)
Important information’s
ATTENTION
Dangerous electrical voltage!
May lead to electrical shock and burn.
Before beginning of work switch unit and equipment free of voltage.
Only let persons work with the equipment who are familiar with installation, start and use
and who have appropriate qualification corresponding to their function. They must observe
the contents of the instructions manual, the information which are written on the equipment
and the relevant security instructions for the setting up and the use of electrical units.
and who have appropriate qualification corresponding to their function. They must observe
the contents of the instructions manual, the information which are written on the equipment
and the relevant security instructions for the setting up and the use of electrical units.
The equipments are built according to DIN / EN and checked and leave the plant according
to security in perfect condition.
If, in any case the information in the instructions manual is not sufficient, please contact
our company or the responsible representative.
Instead of the industrial norms and regulations written in this instructions manual valid for
Europe, you must observe the valid and relevant regulations of the corresponding country.
to security in perfect condition.
If, in any case the information in the instructions manual is not sufficient, please contact
our company or the responsible representative.
Instead of the industrial norms and regulations written in this instructions manual valid for
Europe, you must observe the valid and relevant regulations of the corresponding country.
The
measuring inputs is are insulated from supply-voltage but not from each
other.
Connect one input only!
Universal power supply.
The device has got a universal power supply, that is suitable for DC- and AC-voltages.
Before connecting the device to supply-voltage make sure that the connected voltage
corresponds with the voltage on the type plate on the device.
The device has got a universal power supply, that is suitable for DC- and AC-voltages.
Before connecting the device to supply-voltage make sure that the connected voltage
corresponds with the voltage on the type plate on the device.
Assembly
Slide-in the MINIPAN 300 (1) into the prepared
panel-cut-out (33
+0,6
x 68
+0,7
mm) from
The front side.
Slide the holding clamp (2) over the screw
from the backside.
Screw on the knurled nut (3).
Ensure a right angle between holding clamp
and panel.
Slide the holding clamp (2) over the screw
from the backside.
Screw on the knurled nut (3).
Ensure a right angle between holding clamp
and panel.
!