Lecroy WAVEACE 2032 2-channel oscilloscope, Digital Storage oscilloscope, WaveAce 2032 Benutzerhandbuch
Produktcode
WaveAce 2032
Operator's Manual
920836 Rev A
35
CURSOR - PARAMETER_CUSTOM, PACU
Description
The PARAMETER_CUSTOM command controls the placement of custom cursors and can also be
used to assign any parameter for histogramming.
used to assign any parameter for histogramming.
NOTE: Use PAVA? to read the value of parameters that were set up with PACU. When
PAVA? is used to query a Custom parameter, the source for the measurement is the one
configured using the PACU command.
PAVA? is used to query a Custom parameter, the source for the measurement is the one
configured using the PACU command.
Command Syntax
Parameter_Custom <column>,<parameter>,<source>
<column>:= 1 to 5
<parameter>:=
parameter from the table below or returned with the PAVA? query
<sourceN>:= {C1,C2,C3,C4,TA,TB,TC,TD}
Parameters
Parameter
Definition
Parameter
Definition
AMPL
V Amplitude
NWID
Negative width (negative
edge to positive edge)
edge to positive edge)
BASE
V Base
OVSN
Overshoot negative/FOV
CRMS
Root mean squared
(current)
(current)
OVSP
Overshoot positive/ROV
CMEAN
V Average
PER
Period
DUTY
+ Duty cycle
PKPK
Peak to peak
FALL
Fall time 90% to 10%
PWID
Positive width (positive
edge to negative edge)
edge to negative edge)
FPRE
Falling edge preshoot
RISE
Rise time 10% to 90%
FREQ
Frequency
RMS
Root mean square
MAX
Maximum value
RPRE
Rising edge preshoot
MEAN
Mean value
TOP
Top
MIN
Minimum value
WID
Width
NDUTY
- Duty cycle
OVSN
Overshoot negative/FOV