Greisinger T-Logg 100 SET Temperature Data Logger 601881 Datenbogen
Produktcode
601881
E39.0.01.6C-01
Operating manual
for
T-Logg 100
Version 1.0
1 General
The Logger
T-Logg 100 is designed as a cost-efficient solution for monitoring temperatures. It enables an individual
programming of the recording time. The last 16,000 measuring values can be stored in the memory. In addition, the
LCD-display indicates both the temperature measured at the moment and the operating status of the logger.
LCD-display indicates both the temperature measured at the moment and the operating status of the logger.
2 Required
accessory:
The USB interface of your PC is used to program, start and read out the
T-Logg 100.
For this following accessory is required:
Level
Level
converter
USB 100 or USB 100 SL for direct connection to the USB port of the PC,
cable length approx. 1m.
MINISOFT software (version 7.11 or later / free of charge) to start the logger and read out the logger data.
Notice! It’s also possible to use the T-Logg 100 with the comprehensive software
Notice! It’s also possible to use the T-Logg 100 with the comprehensive software
GSOFT 40K
(version 7.11 or later).
GREISINGER
electronic GmbH
D - 93128 Regenstauf, Hans-Sachs-Straße 26
Tel.: +49 9402/9383-0, Fax: +49 9402/9383-33, eMail: info@greisinger.de