Gmw TG UNI 1AVDE-tester DIN VDE 0701/ 0702 61000 00200 Benutzerhandbuch

To enter the name or designation of the inspector, press the function button
[Inspector] in the configuration menu.
The screen changes to an alphanumeric keypad, with which you can enter
the name or the designation of the inspector. The input field has 20
characters (Fig. 9).
You can switch between letter and numeric keys by using the buttons [123]
or [ABC].
The [C] button deletes the last entered character.
Press the [OK] button to confirm the entry.
The entered name is saved in the memory after the tester has been
switched off.

The scope of functions of the tester can be adapted to customer
specifications. This can simplify the operation of the tester.
These settings do not change the standard conformity of the tester!
You reach the setup menu by pressing the function button [Setup] in the
configuration menu (Fig. 5).

This input area is locked by a code key
(Fig. 10)
Please contact us for further information:
Tel. +49 (0)911 / 3502-0, Fax +49 (0)911 / 3502-307.

Fig. 9

Fig. 10

12

Operating manual for the TG uni 1 appliance tester
Commissioning

The entered name is assigned to every test carried out and also
appears in the log printout.

Fig. 8

With automatic test procedures, the preset duration of every test stage is 5
seconds.
This setting can be changed, if for example the test object requires a longer
time to be switched on.
To do this press the function button [T.-time] in the configuration menu.
Using the 10-button keypad, you can enter a new test time in the next
screen (Fig. 8).
The possible setting range is 3 to 254 seconds.
The factory setting of the tester is 5 seconds per test stage.

&

&

&

&

&

&

&

&

&

&