Gmw TG UNI 1AVDE-tester DIN VDE 0701/ 0702 61000 00200 Benutzerhandbuch

After pressing the [OK] button, the display changes to the ‘Test result’
screen (Fig. 57).

Here you can see all the measurement results with the related limit values.

If the measurement results of the electrical values, the visual inspection and
the function test were all in order, the following message appears:
‘Test OK’.
If the test was not successful the message says:
‘Test not OK!’.

At this point you can cancel the test with the [Cancel] button (the display
goes back to the ‘Settings for measuring’ screen) or switch to the ‘Memory
menu’ with the [->Next] button.

37

Conducting tests in accordance with VDE 0701 and 0702 - PC III

f

f

Fig. 58

Fig. 59

Fig. 57

f

f

Symbols for memory settings:

- internal memory

- MMC memory card

In the ‘Memory menu’ you can use the function button [Change memory] to
switch the storage location for measurement results between the device-
internal memory and the MMC memory card. The current setting is shown
in the menu headline (Fig. 58).

With the [Save] button the display changes to ‘Enter appliance identification’.
Here you can enter a 10-character test object ID number or read it in from
the barcode label with the connected barcode scanner (Abb. 59).

Connecting the barcode scanner - see Page 27.

&

&

&

&

&