Greisinger GMH 3750 Digital Thermometer 601866 Benutzerhandbuch
Produktcode
601866
H49.0.02.6C-06
Operating Manual GMH 3750
Page 13 of 16
_____________________________________________________ _______________________________________________________________________________
12.2 Automatic Recording With Selectable Cycle Time „Func CYCL“
If the logger function “Func CYCL” was activated (see chapter 8 “Device Configuration”), and the
logger was started, it automatically records data sets at intervals of the selected logger cycle time
The logger cycle time is selectable from 1s to 60min (see chapter 8 “Device Configuration”).
Max. number of measurings:16384
logger was started, it automatically records data sets at intervals of the selected logger cycle time
The logger cycle time is selectable from 1s to 60min (see chapter 8 “Device Configuration”).
Max. number of measurings:16384
a) Starting a recording:
press for 2 seconds: the recording will be started.
Each recodring is signales with a short diplay of ‘St.XXXXX’. XX is the number of the data set.
If the logger memory is full, the display will show
If the logger memory is full, the display will show
b) Stop the recording:
Press for 2 seconds: If a recording is running, the Stop menu will be shown
Change selection by:
or
:
Do not stop the recording
Stop the recording
Stores the settings
Note: If you try to switch off the instrument in the cyclic recording operation, You will be
asked automatically if the recording should be stopped.
The device can only be switched off after the recording has been stopped!
The Auto-Power-Off-function is deactivated during recording!
The device can only be switched off after the recording has been stopped!
The Auto-Power-Off-function is deactivated during recording!
c) Clear recorded measurings:
Press for 2 seconds: If logger data are present and the recording was stopped, the
clear menu will be shown
clear menu will be shown
Change selection by:
or
:
Clear nothing
(cancel menu)
(cancel menu)
Clear all recordings
Stores the settings