Emmerich 3.7 V 800 mAh 241107 Datenbogen

Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau

Flammable Properties  

In the event that this battery has been ruptured, the electrolyte solution contain within the battery would be flammable. Like any

sealed container, battery cells may rupture when exposed to excessive heat; this could result in the release of flammable or
corrosive materials.

Use extinguishing media suitable for the materials that are burning.

Not available

Sensitivity to Mechanical Impact: This may result in rupture in extreme cases Sensitivity to Static Discharge: Not Applicable

Fires involving Li-ion Battery can be controlled with water. When water is used, however, hydrogen gas may evolve. In a
confined space, hydrogen gas can form an explosive mixture. In this situation, smothering agents are recommended to

extinguish the fire

As for any fire, evacuate the area and fight the fire from a safe distance. Wear a pressure-demand, self-contained breathing
apparatus and full protective gear. Fight fire from a protected location or a safe distance. Use NIOSH/MSHA approved full-face

self-contained breathing apparatus (SCBA) with full protective gear.

Health: 0

Flammability: 0

Instability: 0

Restrict access to area until completion of clean-up. Do not touch the spilled material. Wear adequate personal protective
equipment as indicated in Section 8.

Prevent material from contaminating soil and from entering sewers or waterways.

Stop the leak if safe to do so. Contain the spilled liquid with dry sand or earth. Clean up spills immediately.

Absorb spilled material with an inert absorbent (dry sand or earth). Scoop contaminated absorbent into an acceptable waste

container. Collect all contaminated absorbent and dispose of according to directions in Section 13. Scrub the area with
detergent and water; collect all contaminated wash water for proper disposal.