Perfectpro HANDSFREE HF1 Datenbogen

1.  LCD display
2.  Rubber buttons panel
3.  Volume control
4. Antenna
5.  Tuning knob
6.  Battery charger switch
7.  Fuse of the battery charger
8.  Power Cord
9.  USB DC power out socket (5V/0.5A)
10.   Aux-in socket
11.  Bluetooth connected LED light
12. Microphone

G B

n

  Before plugging the AC power cord into the AC socket, make sure the voltage  

 

is correct and the 

Battery charger switch is set correctly: ALKALINE when   

 

using no batteries or Alkaline batteries / 

CHARGE NiHM ON when using NiMH  

 

rechargeable batteries.

n

  If you use Alkaline batteries in the radio and the 

Battery charger switch is on  

 

ALKALINE, the batteries will be disconnected automatically when using AC power  

 supply. 

n

  If you use rechargeable NiMH batteries in the radio and the 

 switch is on CHARGE NIMH ON, the NiMH batteries will be charged automatically  

 

when using AC power supply.

n

  AC power cord and plug storage is designed to store the cord and plug when the  

 

radio is not in use or playing on batteries. 

Note:

In order to disconnect the unit from the AC mains completely, the AC power cord should 

be removed from the mains socket completely. The AC power cord shall remain readily 

operable and should not be obstructed during intended use.

In case of malfunction due to electrostatic discharge or fast transient (burst), remove the

power supply and all the batteries then reinstall the batteries and reconnect the power 

supply. 

1.  To open the battery compartment, first turn the battery cover fixtures counter

 

clockwise to loosen and pull down the battery cover. 

2.  This unit can be operated with either Alkaline batteries (6 x 1,5V type IEC LR20 /  

UM-1 / D-size) or NiMH rechargeable batteries (6 x 1,2V PerfectPro Rechargeable

Accu, D size HR20 / 7000mAh). Set the

Battery charger switch in the battery  

 

compartment according to the battery type to be used (

NIMH ON).

3.  Insert the batteries with correct polarity as indicated in the battery compartment (+  

and -). Close the battery cover and fasten the fixtures by turning clockwise. Close

 

well to prevent moist or dust from entering the compartment.

4.  If the unit is not to be used for an extended period of time, it is recommended that  

 

the batteries are removed from the radio.